Humminbird Matrix pinouts ??
 

Hello

Can anyone help me with the pinouts for the connector of my Matrix 35
??

I want to connect my laptop to the fishfinder, and also my Garmin
eTrex GPS receiver. To do this I want to make my own cable.

Electronic schematic would also bee nice !!

Humminbird Matrix pinouts ??
 

My lit (for the Matrix 37, and probably all the Matrix models) is, red=+12v;
black=ground; green=nmea in (connect to gps, nmea "out"). I'm puzzled what
you would do with a laptop connected??
LD


"emvsat" wrote in message
om...
Hello

Can anyone help me with the pinouts for the connector of my Matrix 35
??

I want to connect my laptop to the fishfinder, and also my Garmin
eTrex GPS receiver. To do this I want to make my own cable.

Electronic schematic would also bee nice !!

Humminbird Matrix pinouts ??
 

"LD" wrote in message . ..
My lit (for the Matrix 37, and probably all the Matrix models) is, red=+12v;
black=ground; green=nmea in (connect to gps, nmea "out"). I'm puzzled what
you would do with a laptop connected??
LD


"emvsat" wrote in message
om...
Hello

Can anyone help me with the pinouts for the connector of my Matrix 35
??

I want to connect my laptop to the fishfinder, and also my Garmin
eTrex GPS receiver. To do this I want to make my own cable.

Electronic schematic would also bee nice !!

With the laptop I want to download routes, waypoints and software
upgrades.

Can you use a multimeter and check on which pins the different colours
are connected to. The plug in back of the Matrix should have the
following pinouts:
|----|
| 0|1
|0 |2
| 0|3
|0 |4
| 0/5
|0 / 6
----

Can you measure for me please? I suppose that the +12V lead should not
be connected to my Garmin eTrex with 3V supply?

OL

Humminbird Matrix pinouts ??
 

I would be happy to check except I am 370 miles away from it. (It's in
Pensacola and I'm in Atlanta. Your sketch however, doesn't look like my pin
outs. My 37 uses several sets of 2 or 4 from different plugs (for power,
temp, gps etc.).
LD

"emvsat" wrote in message
om...
"LD" wrote in message
. ..
My lit (for the Matrix 37, and probably all the Matrix models) is,
red=+12v;
black=ground; green=nmea in (connect to gps, nmea "out"). I'm puzzled
what
you would do with a laptop connected??
LD


"emvsat" wrote in message
om...
Hello

Can anyone help me with the pinouts for the connector of my Matrix 35
??

I want to connect my laptop to the fishfinder, and also my Garmin
eTrex GPS receiver. To do this I want to make my own cable.

Electronic schematic would also bee nice !!

With the laptop I want to download routes, waypoints and software
upgrades.

Can you use a multimeter and check on which pins the different colours
are connected to. The plug in back of the Matrix should have the
following pinouts:
|----|
| 0|1
|0 |2
| 0|3
|0 |4
| 0/5
|0 / 6
----

Can you measure for me please? I suppose that the +12V lead should not
be connected to my Garmin eTrex with 3V supply?

OL

Humminbird Matrix pinouts ??
 

"LD" wrote in message ...
I would be happy to check except I am 370 miles away from it. (It's in
Pensacola and I'm in Atlanta. Your sketch however, doesn't look like my pin
outs. My 37 uses several sets of 2 or 4 from different plugs (for power,
temp, gps etc.).
LD

"emvsat" wrote in message
om...
"LD" wrote in message
. ..
My lit (for the Matrix 37, and probably all the Matrix models) is,
red=+12v;
black=ground; green=nmea in (connect to gps, nmea "out"). I'm puzzled
what
you would do with a laptop connected??
LD


"emvsat" wrote in message
om...
Hello

Can anyone help me with the pinouts for the connector of my Matrix 35
??

I want to connect my laptop to the fishfinder, and also my Garmin
eTrex GPS receiver. To do this I want to make my own cable.

Electronic schematic would also bee nice !!

With the laptop I want to download routes, waypoints and software
upgrades.

Can you use a multimeter and check on which pins the different colours
are connected to. The plug in back of the Matrix should have the
following pinouts:
|----|
| 0|1
|0 |2
| 0|3
|0 |4
| 0/5
|0 / 6
----

Can you measure for me please? I suppose that the +12V lead should not
be connected to my Garmin eTrex with 3V supply?

OL

OK.
Maybe I am wrong about the plug myselef. Matrix 37 and 35 should be
equal. I am away from my Matrix myself (oil rig in the North Sea). But
I will check it out when I come home.

OL

"LD" wrote in message ...
I would be happy to check except I am 370 miles away from it. (It's in
Pensacola and I'm in Atlanta. Your sketch however, doesn't look like my pin
outs. My 37 uses several sets of 2 or 4 from different plugs (for power,
temp, gps etc.).
LD

"emvsat" wrote in message
om...
"LD" wrote in message
. ..
My lit (for the Matrix 37, and probably all the Matrix models) is,
red=+12v;
black=ground; green=nmea in (connect to gps, nmea "out"). I'm puzzled
what
you would do with a laptop connected??
LD


"emvsat" wrote in message
om...
Hello

Can anyone help me with the pinouts for the connector of my Matrix 35
??

I want to connect my laptop to the fishfinder, and also my Garmin
eTrex GPS receiver. To do this I want to make my own cable.

Electronic schematic would also bee nice !!

With the laptop I want to download routes, waypoints and software
upgrades.

Can you use a multimeter and check on which pins the different colours
are connected to. The plug in back of the Matrix should have the
following pinouts:
|----|
| 0|1
|0 |2
| 0|3
|0 |4
| 0/5
|0 / 6
----

Can you measure for me please? I suppose that the +12V lead should not
be connected to my Garmin eTrex with 3V supply?

OL



yes, it did look something like this. Anyone with a multimeter and
original cable that wants to share with me the pinouts??