Charging cordless drill on boat ?
 

A friend bought a 19.2 v Sears cordless drill for use on his boat.
He's cruising now in Aust so no 110 VAC wall power. The charger won't
charge the 19.2 VDC battery on either his inverter or his Honda
generator. Sears doesn't have a 12VDC charger so now what.

Any ideas why and how to fix this ? Any possibility of a generic
charger that runs on 12 VDC? I don't know what the 110 VAC charger
puts out - maybe 25 V ??

Charging cordless drill on boat ?
 

Correction/addition - what I should have said is that the fuse on the
110 VAC charger blows on both the inverter and the Honda - that's why
the battery doesn't charge.

A friend bought a 19.2 v Sears cordless drill for use on his boat.
He's cruising now in Aust so no 110 VAC wall power. The charger won't
charge the 19.2 VDC battery on either his inverter or his Honda
generator. Sears doesn't have a 12VDC charger so now what.

Any ideas why and how to fix this ? Any possibility of a generic
charger that runs on 12 VDC? I don't know what the 110 VAC charger
puts out - maybe 25 V ??

Charging cordless drill on boat ?
 

I am going to hazard a guess and say that the 120 VAC to 19.2 VDC charger
requires a good sine wave for operation. It could be that both the inverter
and the honda genset (I believe it has an inverter also - or at least the
web site said so) power output is a modified sine wave that does not get
correctly inverted to 120 VAC.

Perhaps he could try a pure sine wave inverter.... Mucho dinero!

"OMOO" wrote in message
...
Correction/addition - what I should have said is that the fuse on the
110 VAC charger blows on both the inverter and the Honda - that's why
the battery doesn't charge.

A friend bought a 19.2 v Sears cordless drill for use on his boat.
He's cruising now in Aust so no 110 VAC wall power. The charger won't
charge the 19.2 VDC battery on either his inverter or his Honda
generator. Sears doesn't have a 12VDC charger so now what.

Any ideas why and how to fix this ? Any possibility of a generic
charger that runs on 12 VDC? I don't know what the 110 VAC charger
puts out - maybe 25 V ??

Charging cordless drill on boat ?
 

Ny the way the cheapest option may be a new drill :-)

"Rick & Linda Bernard" wrote in message
...
I am going to hazard a guess and say that the 120 VAC to 19.2 VDC charger
requires a good sine wave for operation. It could be that both the
inverter
and the honda genset (I believe it has an inverter also - or at least the
web site said so) power output is a modified sine wave that does not get
correctly inverted to 120 VAC.

Perhaps he could try a pure sine wave inverter.... Mucho dinero!

Charging cordless drill on boat ?
 

My DeWalt will charge on little cheapo inverters like you can find at
WalMart.

"Rick & Linda Bernard" wrote in message
...
Ny the way the cheapest option may be a new drill :-)

"Rick & Linda Bernard" wrote in message
...
I am going to hazard a guess and say that the 120 VAC to 19.2 VDC
charger
requires a good sine wave for operation. It could be that both the
inverter
and the honda genset (I believe it has an inverter also - or at least
the
web site said so) power output is a modified sine wave that does not get
correctly inverted to 120 VAC.

Perhaps he could try a pure sine wave inverter.... Mucho dinero!

Charging cordless drill on boat ?
 

On Sat, 20 Sep 2003 13:55:53 -0700, in message

OMOO wrote:

Correction/addition - what I should have said is that the fuse on the
110 VAC charger blows on both the inverter and the Honda - that's why
the battery doesn't charge.

A friend bought a 19.2 v Sears cordless drill for use on his boat.
He's cruising now in Aust so no 110 VAC wall power. The charger won't
charge the 19.2 VDC battery on either his inverter or his Honda
generator. Sears doesn't have a 12VDC charger so now what.

If he has access to 220/240 shore power, then perhaps a 2:1 step down
transformer will solve the problem for the drill and any other AC
stuff on board. They are not too pricey, especially for a small load
like a drill charger.

Another possibility is that the charger draw on the non-ideal power is
a little higher in a transient way -- he could try a slow blow fuse of
the same rating.

Ryk
--
Unfortunately this address has been overrun by SPAM.
If you want to be sure I see email from you, then
please include the words "Ryk says it's OK" somewhere
in your message.

Charging cordless drill on boat ?
 

OMOO wrote:

A friend bought a 19.2 v Sears cordless drill for use on his boat.
He's cruising now in Aust so no 110 VAC wall power. The charger won't
charge the 19.2 VDC battery on either his inverter or his Honda
generator. Sears doesn't have a 12VDC charger so now what.

Any ideas why and how to fix this ? Any possibility of a generic
charger that runs on 12 VDC? I don't know what the 110 VAC charger
puts out - maybe 25 V ??

try an inverter?


--
Beer, it's not just for breakfast anymore.......

Charging cordless drill on boat ?
 

I agree with those that think the problem is due to using a non-sine
wave inverter. I've recently seen low power true sine wave inverters
advertised for a reasonable price, I think it might have been in the
Norther tool catalog. In any case, I suspect the inverter may still
cost more than a new drill as one writer said. If there is a valid use
for the sine wave inverter other than charging the drill, that may be an
option.

Jim.
OMOO wrote:

A friend bought a 19.2 v Sears cordless drill for use on his boat.
He's cruising now in Aust so no 110 VAC wall power. The charger won't
charge the 19.2 VDC battery on either his inverter or his Honda
generator. Sears doesn't have a 12VDC charger so now what.

Any ideas why and how to fix this ? Any possibility of a generic
charger that runs on 12 VDC? I don't know what the 110 VAC charger
puts out - maybe 25 V ??

Charging cordless drill on boat ?
 

wrote in message ...
I agree with those that think the problem is due to using a non-sine
wave inverter. I've recently seen low power true sine wave inverters
advertised for a reasonable price, I think it might have been in the
Norther tool catalog. In any case, I suspect the inverter may still
cost more than a new drill as one writer said. If there is a valid use
for the sine wave inverter other than charging the drill, that may be an
option.

Jim.
OMOO wrote:

A friend bought a 19.2 v Sears cordless drill for use on his boat.
He's cruising now in Aust so no 110 VAC wall power. The charger won't
charge the 19.2 VDC battery on either his inverter or his Honda
generator. Sears doesn't have a 12VDC charger so now what.

Any ideas why and how to fix this ? Any possibility of a generic
charger that runs on 12 VDC? I don't know what the 110 VAC charger
puts out - maybe 25 V ??

There's a lot of chargers for radio control/battery powered craft-
typically the aircraft have anywhere from 4 cells on up. andf they want the
darned cells charged fast. Plus they typically use a car battery for the
energy source. Trouble is, the chargers are gonna set you back a lot more
than the drill. If I was stuck with 12 volts as the source and didn't want
to shel out a bunch for the tool, I'd get a 12v drill- for the commonality.
Regards Pat

Charging cordless drill on boat ?
 

OMOO wrote:

Correction/addition - what I should have said is that the fuse on the
110 VAC charger blows on both the inverter and the Honda - that's why
the battery doesn't charge.



A friend bought a 19.2 v Sears cordless drill for use on his boat.
He's cruising now in Aust so no 110 VAC wall power. The charger won't
charge the 19.2 VDC battery on either his inverter or his Honda
generator. Sears doesn't have a 12VDC charger so now what.

Any ideas why and how to fix this ? Any possibility of a generic
charger that runs on 12 VDC? I don't know what the 110 VAC charger
puts out - maybe 25 V ??






Perhaps he should get/use a slow 19.2v charger, since it sounds like the
charger he has is drawing too much.

In a pinch, he might be able to use a variable-output power supply: Dial
in a lower voltage until the battery is somewhat charged, then increase
the voltage to match the demand.

I have a 12v rechargeable that is easily charged from a 250 watt
inverter in a few hours. ('Course, I chose 12v so I could go direct
to/from 12v if I needed to. It's more than powerful enough for my
purposes -- like 1/2" holes through oak, fiberglass and aluminum....)

--
Jere Lull
Xan-a-Deux ('73 Tanzer 28 #4 out of Tolchester, MD)
Xan's Pages: http://members.dca.net/jerelull/X-Main.html
Our BVI FAQs (290+ pics) http://homepage.mac.com/jerelull/BVI/