BoatBanter.com

BoatBanter.com (https://www.boatbanter.com/)
-   Electronics (https://www.boatbanter.com/electronics/)
-   -   ST40-Wind interface/calibration question (https://www.boatbanter.com/electronics/10609-st40-wind-interface-calibration-question.html)

Skarquin August 29th 03 01:19 PM

ST40-Wind interface/calibration question
 
I have two ST40Wind units. Neither indicates wind speed. When I connect
the wind transducer I get a fixed wind angle that never changes but no wind
speed. Without the transducer connections no data is displayed at all.
Checked cables for continuity...all OK. Question is...do I need to
calibrate before I get to see any readings? Do I have a transducer issue
(what kind of signal does the rotovecta produce? I'm assuming it is either
magnetic pulse or opto coupler)

Why can't you talk to a live person at Raymarine? The web based "solutions"
are less than ideal.



NIFFOCBT August 30th 03 01:14 AM

ST40-Wind interface/calibration question
 
Call 18005395539 I call Raymarine tech support all the time. 99% chance it is
the Wind Vane (Transducer) that is defective.

Good luck

B


All times are GMT +1. The time now is 03:03 AM.

Powered by vBulletin® Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Copyright ©2004 - 2014 BoatBanter.com