NASA Depth sounder help
 

Can someone provide me with some instructions for the use of my NASA Target
Depth Sounder.
There are only 3 buttons, but, I have been unable to deduce how to set the
alarms. Are there any other features are avauilable besides max/min depth
alarms.
Thanks in advance - Mark

NASA Depth sounder help
 

"WaIIy" wrote in message
...
On Mon, 21 Jul 2003 22:23:26 +0100, "Mark"
wrote:

Can someone provide me with some instructions for the use of my NASA
Target
Depth Sounder.
There are only 3 buttons, but, I have been unable to deduce how to set
the
alarms. Are there any other features are avauilable besides max/min depth
alarms.
Thanks in advance - Mark

Briefly, to set keel offset, press set before turning on power, use
alarm up
and alarm down to set desired value. complete by pressing set.

each time the unit is switched on, the offset value is displayed for a
few
seconds.

to set alarms...

press alarm up (down) all it says is enter the new value and accept by
pressing set.

To enable alarms, press alarm up and down at the same time. an "A" will
display briefly to show that alarms are set. Same to disabl

***************
Thanks for the info.
Mark