What to use on walls of head??
 

Anyone have any idea on material to apply over plywood bulkheads on
forward head of Morgan OI 41?? I have thought of the following:
stainless sheeting (what gauge? 18?); formica, vinyl wallpaper. Had
wallpaper on before but it was always peeling and attracting mildew. I
had also thought of some type of acrylic sheeting but have no idea of
what is available. Would also appreciate source of material you might
recommend. Thanks. Joe

What to use on walls of head??
 

On Tue, 23 Mar 2004 00:25:31 -0500, nospam wrote:

Anyone have any idea on material to apply over plywood bulkheads on
forward head of Morgan OI 41?? I have thought of the following:
stainless sheeting (what gauge? 18?); formica, vinyl wallpaper. Had
wallpaper on before but it was always peeling and attracting mildew. I
had also thought of some type of acrylic sheeting but have no idea of
what is available. Would also appreciate source of material you might
recommend. Thanks. Joe

Well, I would ensure the plywood itself is completely watertight.

Once that's confirmed, you might consider the type of material used in
tub surrounds, where they retrofit over tiles to create a seamless
surface. I LIKE the idea of stainless, or even aluminum
sheeting...hey, copper sheating as used for roofs would be cool, if
you like the eventually greeny tinge...

Me, I like metal or something without a break, like precision-cut
vinyl. Sealing the wood behind is paramount, IMO.

R.

What to use on walls of head??
 

Don't use stainless. Urine will corrode it in short order. Just take a look
at where they've used that in restrooms. ug. Stick with something
non-metallic like laminate, FG or similar.

--


Keith
__
Health nuts are going to feel stupid someday, lying in hospitals
dying of nothing.
"nospam" wrote in message
...
Anyone have any idea on material to apply over plywood bulkheads on
forward head of Morgan OI 41?? I have thought of the following:
stainless sheeting (what gauge? 18?); formica, vinyl wallpaper. Had
wallpaper on before but it was always peeling and attracting mildew. I
had also thought of some type of acrylic sheeting but have no idea of
what is available. Would also appreciate source of material you might
recommend. Thanks. Joe

What to use on walls of head??
 

I used vertical grade high pressure laminate (Formica and the like). It
is thinner than regular weight laminate and will bend into about a 2"
radius but you have to build up a big fillet behind it for support.

You need to use the highly flamable contact cement though. THe water
based stuff just does not have enough grip. I put mine on before the
deck went on. I would hate to do it in a closed up head without a
remote source resperator.

nospam wrote:

Anyone have any idea on material to apply over plywood bulkheads on
forward head of Morgan OI 41?? I have thought of the following:
stainless sheeting (what gauge? 18?); formica, vinyl wallpaper. Had
wallpaper on before but it was always peeling and attracting mildew. I
had also thought of some type of acrylic sheeting but have no idea of
what is available. Would also appreciate source of material you might
recommend. Thanks. Joe

--
Glenn Ashmore

I'm building a 45' cutter in strip/composite. Watch my progress (or lack
there of) at: http://www.rutuonline.com
Shameless Commercial Division: http://www.spade-anchor-us.com

What to use on walls of head??
 

I used shower board from Home Depot and Liquid Nails waterproof. Looks nice.

Anyone have any idea on material to apply over plywood bulkheads on
forward head of Morgan OI 41?? I have thought of the following:
stainless sheeting (what gauge? 18?); formica, vinyl wallpaper. Had
wallpaper on before but it was always peeling and attracting mildew. I
had also thought of some type of acrylic sheeting but have no idea of
what is available. Would also appreciate source of material you might
recommend. Thanks. Joe

--
Glenn Ashmore

I'm building a 45' cutter in strip/composite. Watch my progress (or lack
there of) at: http://www.rutuonline.com
Shameless Commercial Division: http://www.spade-anchor-us.com

What to use on walls of head??
 

hardwares stores sell a thin fiberglass shower board.

What to use on walls of head??
 

Most any type water based urthane will resist urine. Minwax at home depot
"Florida Keyz" wrote in message
...
hardwares stores sell a thin fiberglass shower board.

What to use on walls of head??
 

use the shower board. it looks nicer.

Most any type water based urthane will resist urine. Minwax at home depot
"Florida Keyz" wrote in message
...
hardwares stores sell a thin fiberglass shower board.

What to use on walls of head??
 

My mommy taught me to not pee in the shower :)

"Keith" wrote in message
...
Don't use stainless. Urine will corrode it in short order. Just take a
look
at where they've used that in restrooms. ug. Stick with something
non-metallic like laminate, FG or similar.

--


Keith
__
Health nuts are going to feel stupid someday, lying in hospitals
dying of nothing.
"nospam" wrote in message
...
Anyone have any idea on material to apply over plywood bulkheads on
forward head of Morgan OI 41?? I have thought of the following:
stainless sheeting (what gauge? 18?); formica, vinyl wallpaper. Had
wallpaper on before but it was always peeling and attracting mildew. I
had also thought of some type of acrylic sheeting but have no idea of
what is available. Would also appreciate source of material you might
recommend. Thanks. Joe

What to use on walls of head??
 

Somebody asks:

Anyone have any idea on material to apply over plywood bulkheads on
forward head of Morgan OI 41??
snip

Apply a layer of 17 oz glass with epoxy to seal the plywood.

Shoot glass with high build primer followed by L/P.

After that, strictly a sponge and water to clean.

BTW, the above is how I'm finishing my head including a full size, stand up,
dedicated shower.

HTH


--
Lew

S/A: Challenge, The Bullet Proof Boat, (Under Construction in the Southland)
Visit: http://home.earthlink.net/~lewhodgett for Pictures