Home |
Search |
Today's Posts |
#1
|
|||
|
|||
Supporting a boat by its mast.
From other members of the news group thoughts and
experience am I missing something or is this something that can be carried out providing there is care with a reasonable degree of ease and safety. The plan is to block of the foot of the keel and secure ropes from the top of the mast out to the sides at about 45 degrees to hold the boat upright so the support pads on the wintering cradle can be lowered to allow unhindered access to apply the 4 plus coats of epoxy coating to the under sides. Or has anyone any other suggestions of a better way to support the boat whilst it is epoxied. The boat weight is around 10 ton with a 50 foot plus mast and a moderate keel that is level bottom. All thoughts very much appreciated I have not seen or done or attempted any thing like this before. |
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Forum | |||
Looked today ( Boat Choices) | Cruising | |||
Boat fell off trailer | General | |||
offshore fishing | General | |||
1st boat help | General | |||
Dealing with a boat fire, checking for a common cause | General |