HPI vs. RIB vs. Walker Bay hybrid decision
We had a 9'+ Avon with HPI floor and a 4hp/4-stroke. The rig itself
was terrific although the hp was a tad low. Towing, seaworthiness, ingress/egress, etc. was excellent. HOWEVER, I was constantly paranoid about dropping the engine off the sailboat and through the HPI floor. The instability of the floor didn't help either and I nearly went overboard with the engine several times. Consequently, the heavy engine tended to stay on the boat and the boat in the water, neither of which gave me comfort. So I sold the Avon dinghy/motor and bought a used Walker Bay 8' plastic, disposable boat. It rowed well solo, towed poorly last year but gave me peace of mind. The solution to it's ills this year is to retrofit it with WB' PVC multi-chamber tubes, a self drain plug and 3.3 o/b. The combo is less expensive than a RIB, more durable and better balanced than the HPI, provides 'get home' assurance and more flotation. |
HPI vs. RIB vs. Walker Bay hybrid decision
I read somewhere recently (Sail Magazine I think) the retrofit tubes are
available in three sizes, thin (not much more than a fender strip), Medium & Thick (making the Walker Bay look almost like an inflatable and able to carry a bigger payload but making it harder to row??). So you've got lots of choices for the retrofit. -- Ken Heaton & Anne Tobin Cape Breton Island, Canada kenheaton AT ess wye dee DOT eastlink DOT ca "Morris40" wrote in message om... We had a 9'+ Avon with HPI floor and a 4hp/4-stroke. The rig itself was terrific although the hp was a tad low. Towing, seaworthiness, ingress/egress, etc. was excellent. HOWEVER, I was constantly paranoid about dropping the engine off the sailboat and through the HPI floor. The instability of the floor didn't help either and I nearly went overboard with the engine several times. Consequently, the heavy engine tended to stay on the boat and the boat in the water, neither of which gave me comfort. So I sold the Avon dinghy/motor and bought a used Walker Bay 8' plastic, disposable boat. It rowed well solo, towed poorly last year but gave me peace of mind. The solution to it's ills this year is to retrofit it with WB' PVC multi-chamber tubes, a self drain plug and 3.3 o/b. The combo is less expensive than a RIB, more durable and better balanced than the HPI, provides 'get home' assurance and more flotation. |
HPI vs. RIB vs. Walker Bay hybrid decision
I read somewhere recently (Sail Magazine I think) the retrofit tubes are
available in three sizes, thin (not much more than a fender strip), Medium & Thick (making the Walker Bay look almost like an inflatable and able to carry a bigger payload but making it harder to row??). So you've got lots of choices for the retrofit. -- Ken Heaton & Anne Tobin Cape Breton Island, Canada kenheaton AT ess wye dee DOT eastlink DOT ca "Morris40" wrote in message om... We had a 9'+ Avon with HPI floor and a 4hp/4-stroke. The rig itself was terrific although the hp was a tad low. Towing, seaworthiness, ingress/egress, etc. was excellent. HOWEVER, I was constantly paranoid about dropping the engine off the sailboat and through the HPI floor. The instability of the floor didn't help either and I nearly went overboard with the engine several times. Consequently, the heavy engine tended to stay on the boat and the boat in the water, neither of which gave me comfort. So I sold the Avon dinghy/motor and bought a used Walker Bay 8' plastic, disposable boat. It rowed well solo, towed poorly last year but gave me peace of mind. The solution to it's ills this year is to retrofit it with WB' PVC multi-chamber tubes, a self drain plug and 3.3 o/b. The combo is less expensive than a RIB, more durable and better balanced than the HPI, provides 'get home' assurance and more flotation. |
All times are GMT +1. The time now is 05:07 AM. |
Powered by vBulletin® Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright ©2004 - 2014 BoatBanter.com