LinkBack Thread Tools Search this Thread Display Modes
Prev Previous Post   Next Post Next
  #9   Report Post  
Steven Shelikoff
 
Posts: n/a
Default Fuel Polishing again.

On Fri, 09 Jan 2004 00:59:52 GMT, Brian Whatcott
wrote:

On Thu, 08 Jan 2004 05:54:34 GMT, (Steven
Shelikoff) wrote:

On Thu, 08 Jan 2004 02:51:46 GMT, Rich Hampel
wrote:

NOPE!
In pressure mode, the filter will also act as a 'coalescer' (bringing
similar surface tension fluids together to make larger and larger sized
particles) and such particles will settle out into a 'drop-out-pot'
..... or usually into the bottom of the filter bowl (bowl pointing
downwards). ///


All this begs the question, why does the filter media care whether it's
in "pressure" mode or "vacuum" mode? Sure, the plumbing and filter
cases care. But the media only sees a pressure differential across it.
What's the difference to the media if the there is 14psi (atmospheric
pressure) on one side and, say, 10 psi (a 4 psi vacuum drawing fuel
across the media) on the other side vs. 18 psi (4 psi pressure pushing
fuel across the media) on one side and 14 psi (atmospheric) on the
other?

IOW, even if the pump is past the filter drawing fuel through it, the
filter is still in "pressure" mode because it's really the atmospheric
pressure pushing fuel through the filter.

Steve



Looks like the contribution that mentioned a pressure pump's tendency
to mix and chop big water drops to a clogging emulsion where the
vacuum pump sucks them into the filter intact - that idea didn't
appeal to you?


Sure did. So does the idea that I'd rather have a malfunction that lets
air into the system than one that lets fuel out. But both of those
points leads to the conclusion that you should suck fuel through the
filter rather than push it through.

However, Rich recommends that fuel be pushed through due to some
tendency of the filter media to work better in that mode. Thus my
question, discounting all other aspects at hand such as the pump
emulsifying the fuel before it gets to the filter, why does the filter
media care which side the pump is on? Fuel is being pushed through it
either way, either by the pump with a higher pressure on the inlet or
the atmosphere with a higher pressure on the inlet.

Steve
 
Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules

Smilies are On
[IMG] code is Off
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Diesel Fuel Decontamination Units Give Stored Fuel Longer Life. John T. Nightingale General 6 February 20th 04 02:28 PM
Diesel Fuel Decontamination Units Give Stored Fuel Longer Life. John T. Nightingale Boat Building 7 February 19th 04 08:00 PM
fuel delivery problem on outboard? help Russell Hermansen General 9 October 7th 03 01:40 AM
fuel polishing help needed Lee Huddleston Cruising 3 July 14th 03 03:20 PM
fuel polishing help needed Lee Huddleston Boat Building 2 July 13th 03 03:22 PM


All times are GMT +1. The time now is 10:13 AM.

Powered by vBulletin® Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Copyright ©2004-2025 BoatBanter.com.
The comments are property of their posters.
 

About Us

"It's about Boats"

 

Copyright © 2017