SpeedSeal Water Pump Cover
 

Anyone have any first hand experience with this product? Pros and cons?

SpeedSeal Water Pump Cover
 

SpeedSeal Water Pump Cover
 

SpeedSeal Water Pump Cover
 

Anyone have any first hand experience with this product? Pros and cons?
I installed one last year...after an email dialogue with the very helpful seller in England.
Works as advertised, simple and robust. Highly recommended...

Cheers-

Boyd
S/V Eentje
Baltimore

SpeedSeal Water Pump Cover
 

Anyone have any first hand experience with this product? Pros and cons?
I installed one last year...after an email dialogue with the very helpful seller in England.
Works as advertised, simple and robust. Highly recommended...

Cheers-

Boyd
S/V Eentje
Baltimore

SpeedSeal Water Pump Cover
 

Great product! I carry a spare as well and multple spare thumbscrews and
o-rings. Mine is on a Perkins 4-236.

Doug
s/v Callista

"Hmseconomy" wrote in message
...
Anyone have any first hand experience with this product? Pros and cons?

SpeedSeal Water Pump Cover
 

Great product! I carry a spare as well and multple spare thumbscrews and
o-rings. Mine is on a Perkins 4-236.

Doug
s/v Callista

"Hmseconomy" wrote in message
...
Anyone have any first hand experience with this product? Pros and cons?

SpeedSeal Water Pump Cover
 

Put them on every boat I've owned. All my marina mates have them now.
Especialy good on the Yanmar reverse facing pumps. Can replace the
impeller by feel.


On Fri, 28 Nov 2003 11:12:49 -0500, "Doug Dotson"
wrote:

Great product! I carry a spare as well and multple spare thumbscrews and
o-rings. Mine is on a Perkins 4-236.

Doug
s/v Callista

"Hmseconomy" wrote in message
...
Anyone have any first hand experience with this product? Pros and cons?

SpeedSeal Water Pump Cover
 

Put them on every boat I've owned. All my marina mates have them now.
Especialy good on the Yanmar reverse facing pumps. Can replace the
impeller by feel.


On Fri, 28 Nov 2003 11:12:49 -0500, "Doug Dotson"
wrote:

Great product! I carry a spare as well and multple spare thumbscrews and
o-rings. Mine is on a Perkins 4-236.

Doug
s/v Callista

"Hmseconomy" wrote in message
...
Anyone have any first hand experience with this product? Pros and cons?

SpeedSeal Water Pump Cover
 

Especialy good on the Yanmar reverse facing pumps. Can replace the
impeller by feel. BRBR

I've got the Yanmar 2GM20F with the waterpump facing aft. It would appear that
this model for require the SpeedSeal with four thumbscrews. Is that correct?
If so, it also seems that two of the four would remain in place as you slide
the cover into their slots and then put in the last two thumbscrews. How
difficult is that to do by feel as you would not be able to see the screw
holes?

SpeedSeal Water Pump Cover
 

Especialy good on the Yanmar reverse facing pumps. Can replace the
impeller by feel. BRBR

I've got the Yanmar 2GM20F with the waterpump facing aft. It would appear that
this model for require the SpeedSeal with four thumbscrews. Is that correct?
If so, it also seems that two of the four would remain in place as you slide
the cover into their slots and then put in the last two thumbscrews. How
difficult is that to do by feel as you would not be able to see the screw
holes?

SpeedSeal Water Pump Cover
 

That is correct. The lower two screws are just loosened and the upper
two are removed. Then the plate just lifts up and off. I didn't have this
system on my Yanmar (3GM30F) and never changed an impeller on it
so I can't comment on that part. Its got to be better than trying to use a
screwdriver or nutdriver around a blind corner though.

Doug
s/v Callista

"Hmseconomy" wrote in message
...
Especialy good on the Yanmar reverse facing pumps. Can replace the
impeller by feel. BRBR

I've got the Yanmar 2GM20F with the waterpump facing aft. It would appear
that
this model for require the SpeedSeal with four thumbscrews. Is that
correct?
If so, it also seems that two of the four would remain in place as you
slide
the cover into their slots and then put in the last two thumbscrews. How
difficult is that to do by feel as you would not be able to see the screw
holes?

SpeedSeal Water Pump Cover
 

That is correct. The lower two screws are just loosened and the upper
two are removed. Then the plate just lifts up and off. I didn't have this
system on my Yanmar (3GM30F) and never changed an impeller on it
so I can't comment on that part. Its got to be better than trying to use a
screwdriver or nutdriver around a blind corner though.

Doug
s/v Callista

"Hmseconomy" wrote in message
...
Especialy good on the Yanmar reverse facing pumps. Can replace the
impeller by feel. BRBR

I've got the Yanmar 2GM20F with the waterpump facing aft. It would appear
that
this model for require the SpeedSeal with four thumbscrews. Is that
correct?
If so, it also seems that two of the four would remain in place as you
slide
the cover into their slots and then put in the last two thumbscrews. How
difficult is that to do by feel as you would not be able to see the screw
holes?

SpeedSeal Water Pump Cover
 

Yup - i put one on my yanmar 2gm20f - they helped me pick the right size -
shipped right away - it works great.

--


Please note - My ATT email adress has changed. The new address is:



If for any reason that bounces, please feel free to use:


"Doug Dotson" wrote in message
...
That is correct. The lower two screws are just loosened and the upper
two are removed. Then the plate just lifts up and off. I didn't have this
system on my Yanmar (3GM30F) and never changed an impeller on it
so I can't comment on that part. Its got to be better than trying to use a
screwdriver or nutdriver around a blind corner though.

Doug
s/v Callista

"Hmseconomy" wrote in message
...
Especialy good on the Yanmar reverse facing pumps. Can replace the
impeller by feel. BRBR

I've got the Yanmar 2GM20F with the waterpump facing aft. It would
appear
that
this model for require the SpeedSeal with four thumbscrews. Is that
correct?
If so, it also seems that two of the four would remain in place as you
slide
the cover into their slots and then put in the last two thumbscrews.
How
difficult is that to do by feel as you would not be able to see the
screw
holes?

SpeedSeal Water Pump Cover
 

Yup - i put one on my yanmar 2gm20f - they helped me pick the right size -
shipped right away - it works great.

--


Please note - My ATT email adress has changed. The new address is:



If for any reason that bounces, please feel free to use:


"Doug Dotson" wrote in message
...
That is correct. The lower two screws are just loosened and the upper
two are removed. Then the plate just lifts up and off. I didn't have this
system on my Yanmar (3GM30F) and never changed an impeller on it
so I can't comment on that part. Its got to be better than trying to use a
screwdriver or nutdriver around a blind corner though.

Doug
s/v Callista

"Hmseconomy" wrote in message
...
Especialy good on the Yanmar reverse facing pumps. Can replace the
impeller by feel. BRBR

I've got the Yanmar 2GM20F with the waterpump facing aft. It would
appear
that
this model for require the SpeedSeal with four thumbscrews. Is that
correct?
If so, it also seems that two of the four would remain in place as you
slide
the cover into their slots and then put in the last two thumbscrews.
How
difficult is that to do by feel as you would not be able to see the
screw
holes?

SpeedSeal Water Pump Cover
 

Yup - i put one on my yanmar 2gm20f - they helped me pick the right size -
shipped right away - it works great. BRBR


Hi Mike:

I think I have the same engine. Does your raw water pump face aft and the
only way to replace the impeller was to take the pump off the bracket?

Did you buy the SpeedSeal with four thumbscrews? I assume that two must stay
in place and that you still need to "feel" the holes for the other two and
put them in blind? How difficult, or not, is this to do? Any advice would
be appreciated.

SpeedSeal Water Pump Cover
 

Yup - i put one on my yanmar 2gm20f - they helped me pick the right size -
shipped right away - it works great. BRBR


Hi Mike:

I think I have the same engine. Does your raw water pump face aft and the
only way to replace the impeller was to take the pump off the bracket?

Did you buy the SpeedSeal with four thumbscrews? I assume that two must stay
in place and that you still need to "feel" the holes for the other two and
put them in blind? How difficult, or not, is this to do? Any advice would
be appreciated.