![]() |
Vinegar Stroke...Peggy Hall???
It has been suggested by someone who *knows*, that vinegar is a good
medium for clearing out persistant residue in a narrowboat toilet holding tank. Apparently you leave it in to soak for about 24 hours before thoroughly flushing. Has anyone any practical experience with this? It has been suggested that it wouldn't be a good idea in plastic tanks as vinegar might harden the seams. Do we have any feed-back before we try it? Tony holding back on the Basingstoke Canal |
Vinegar Stroke...Peggy Hall???
This is a common technique, practiced by many cruisers. When I lived aboard, I always
kept a gallon of vinegar in the head so I wouldn't forget. Peggy has endorsed this in the past (this from last March): Vinegar ONLY dissolves mineral buildup, it won't do much for dirt and grime and won't dissolve soap scum, grease or hair. You're right that I recommend it though...a cupful down the toilet once a week. Just don't leave it sitting in the bowl. Vinegar will damage rubber. A cupful flushed through the toilet doesn't stick around long enough to hurt anything, but it'll destroy a joker valve left to soak in it. Btw...this is WHITE vinegar we're talking about, not cider. Because white vinegar is more acidic than cider, it does a better job of dissolving sea water minerals. "canalman" wrote in message om... It has been suggested by someone who *knows*, that vinegar is a good medium for clearing out persistant residue in a narrowboat toilet holding tank. Apparently you leave it in to soak for about 24 hours before thoroughly flushing. Has anyone any practical experience with this? It has been suggested that it wouldn't be a good idea in plastic tanks as vinegar might harden the seams. Do we have any feed-back before we try it? Tony holding back on the Basingstoke Canal |
Vinegar Stroke...Peggy Hall???
This is a common technique, practiced by many cruisers. When I lived aboard, I always
kept a gallon of vinegar in the head so I wouldn't forget. Peggy has endorsed this in the past (this from last March): Vinegar ONLY dissolves mineral buildup, it won't do much for dirt and grime and won't dissolve soap scum, grease or hair. You're right that I recommend it though...a cupful down the toilet once a week. Just don't leave it sitting in the bowl. Vinegar will damage rubber. A cupful flushed through the toilet doesn't stick around long enough to hurt anything, but it'll destroy a joker valve left to soak in it. Btw...this is WHITE vinegar we're talking about, not cider. Because white vinegar is more acidic than cider, it does a better job of dissolving sea water minerals. "canalman" wrote in message om... It has been suggested by someone who *knows*, that vinegar is a good medium for clearing out persistant residue in a narrowboat toilet holding tank. Apparently you leave it in to soak for about 24 hours before thoroughly flushing. Has anyone any practical experience with this? It has been suggested that it wouldn't be a good idea in plastic tanks as vinegar might harden the seams. Do we have any feed-back before we try it? Tony holding back on the Basingstoke Canal |
Vinegar Stroke...Peggy Hall???
It has been suggested by someone who *knows*, that vinegar is a good
medium for clearing out persistant residue in a narrowboat toilet holding tank. Apparently you leave it in to soak for about 24 hours before thoroughly flushing. In the 16 years we have had our boat the pipes in our head has only cloged up with salt and whatever once. After that we used vinegar in the pipes and holding tank at least twice a year. No problems since, so I guess it works. We also use it in the sink drains. I use it to clean the carbon off stove parts and a lot of other things. It seems to be a good solvent. I use it to clean the salt out of my outboard too. Dick |
Vinegar Stroke...Peggy Hall???
It has been suggested by someone who *knows*, that vinegar is a good
medium for clearing out persistant residue in a narrowboat toilet holding tank. Apparently you leave it in to soak for about 24 hours before thoroughly flushing. In the 16 years we have had our boat the pipes in our head has only cloged up with salt and whatever once. After that we used vinegar in the pipes and holding tank at least twice a year. No problems since, so I guess it works. We also use it in the sink drains. I use it to clean the carbon off stove parts and a lot of other things. It seems to be a good solvent. I use it to clean the salt out of my outboard too. Dick |
Vinegar Stroke...Peggy Hall???
I just asked her that very question, as I have a holding tank with lots
of "residue" in it that prohibits an accurate reading of its level. She suggests putting some Wisk detergent in it to slosh around and clean up the greasy residue so that i can see how much stuff i have in it. It will be easier in my trailerboat or another that moves around a lot, but should still be an improvement, I think. At least it's a cheap fix, even if it doesn't work. Capt. Jeff |
Vinegar Stroke...Peggy Hall???
I just asked her that very question, as I have a holding tank with lots
of "residue" in it that prohibits an accurate reading of its level. She suggests putting some Wisk detergent in it to slosh around and clean up the greasy residue so that i can see how much stuff i have in it. It will be easier in my trailerboat or another that moves around a lot, but should still be an improvement, I think. At least it's a cheap fix, even if it doesn't work. Capt. Jeff |
Vinegar Stroke...Peggy Hall???
canalman wrote:
It has been suggested by someone who *knows*, that vinegar is a good medium for clearing out persistant residue in a narrowboat toilet holding tank. I don't think so. Vinegar will dissolve sea water mineral buildup in hoses, but I've never heard that it will dissolve sludge in holding tanks. Holding tanks should be at least nominally flushed out with a couple of gallons of clean water down the pumpout fitting (because that sends it directly into the bottom of the tank to stir up the sludge) after every pumpout...and thoroughly flushed by doing that several times--until what's being pumped out is only clean water--several times a year. To my knowledge, there is no other way. It has been suggested that it wouldn't be a good idea in plastic tanks as vinegar might harden the seams. Do we have any feed-back before we try it? I've never heard that before either. It appears to me that all the advice you've been getting is bad. -- Peggie ---------- Peggie Hall Specializing in marine sanitation since 1987 Author "Get Rid of Boat Odors - A Guide To Marine Sanitation Systems and Other Sources of Aggravation and Odor" http://www.seaworthy.com/html/get_ri...oat_odors.html |
Vinegar Stroke...Peggy Hall???
canalman wrote:
It has been suggested by someone who *knows*, that vinegar is a good medium for clearing out persistant residue in a narrowboat toilet holding tank. I don't think so. Vinegar will dissolve sea water mineral buildup in hoses, but I've never heard that it will dissolve sludge in holding tanks. Holding tanks should be at least nominally flushed out with a couple of gallons of clean water down the pumpout fitting (because that sends it directly into the bottom of the tank to stir up the sludge) after every pumpout...and thoroughly flushed by doing that several times--until what's being pumped out is only clean water--several times a year. To my knowledge, there is no other way. It has been suggested that it wouldn't be a good idea in plastic tanks as vinegar might harden the seams. Do we have any feed-back before we try it? I've never heard that before either. It appears to me that all the advice you've been getting is bad. -- Peggie ---------- Peggie Hall Specializing in marine sanitation since 1987 Author "Get Rid of Boat Odors - A Guide To Marine Sanitation Systems and Other Sources of Aggravation and Odor" http://www.seaworthy.com/html/get_ri...oat_odors.html |
Vinegar Stroke...Peggy Hall???
Jeff Morris wrote:
This is a common technique, practiced by many cruisers. When I lived aboard, I always kept a gallon of vinegar in the head so I wouldn't forget. Peggy has endorsed this in the past (this from last March): Vinegar ONLY dissolves mineral buildup, it won't do much for dirt and grime and won't dissolve soap scum, grease or hair. I did say that...but I've never said that vinegar will dissolve sludge in holding tanks--which is what he's asking. Peggie ---------- Peggie Hall Specializing in marine sanitation since 1987 Author "Get Rid of Boat Odors - A Guide To Marine Sanitation Systems and Other Sources of Aggravation and Odor" http://www.seaworthy.com/html/get_ri...oat_odors.html |
Vinegar Stroke...Peggy Hall???
Jeff Morris wrote:
This is a common technique, practiced by many cruisers. When I lived aboard, I always kept a gallon of vinegar in the head so I wouldn't forget. Peggy has endorsed this in the past (this from last March): Vinegar ONLY dissolves mineral buildup, it won't do much for dirt and grime and won't dissolve soap scum, grease or hair. I did say that...but I've never said that vinegar will dissolve sludge in holding tanks--which is what he's asking. Peggie ---------- Peggie Hall Specializing in marine sanitation since 1987 Author "Get Rid of Boat Odors - A Guide To Marine Sanitation Systems and Other Sources of Aggravation and Odor" http://www.seaworthy.com/html/get_ri...oat_odors.html |
Vinegar Stroke...Peggy Hall???
Dick wrote:
with salt and whatever once. After that we used vinegar in the pipes and holding tank at least twice a year. No problems since, so I guess it works. I can't imagine that only using it twice a year would accomplish anything. To prevent mineral build up in the head discharge hose, I recommend a cupful down the head once a week. We also use it in the sink drains. I use it to clean the carbon off stove parts and a lot of other things. It seems to be a good solvent. Be very careful what you mix with vinegar... some chemical combinations--such as bleach and vinegar--can be even more lethat than bleach and ammonia. And never let it stand where rubber parts can soak in it...'cuz a soaking in vinegar will swell and distort them. Peggie ---------- Peggie Hall Specializing in marine sanitation since 1987 Author "Get Rid of Boat Odors - A Guide To Marine Sanitation Systems and Other Sources of Aggravation and Odor" http://www.seaworthy.com/html/get_ri...oat_odors.html |
Vinegar Stroke...Peggy Hall???
Dick wrote:
with salt and whatever once. After that we used vinegar in the pipes and holding tank at least twice a year. No problems since, so I guess it works. I can't imagine that only using it twice a year would accomplish anything. To prevent mineral build up in the head discharge hose, I recommend a cupful down the head once a week. We also use it in the sink drains. I use it to clean the carbon off stove parts and a lot of other things. It seems to be a good solvent. Be very careful what you mix with vinegar... some chemical combinations--such as bleach and vinegar--can be even more lethat than bleach and ammonia. And never let it stand where rubber parts can soak in it...'cuz a soaking in vinegar will swell and distort them. Peggie ---------- Peggie Hall Specializing in marine sanitation since 1987 Author "Get Rid of Boat Odors - A Guide To Marine Sanitation Systems and Other Sources of Aggravation and Odor" http://www.seaworthy.com/html/get_ri...oat_odors.html |
Vinegar Stroke...Peggy Hall???
Messing In Boats wrote:
I just asked her that very question, as I have a holding tank with lots of "residue" in it that prohibits an accurate reading of its level. She suggests putting some Wisk detergent in it to slosh around and clean up the greasy residue so that i can see how much stuff i have in it. Detergent will emulsify any buildup of animal fats (present in waste)...which makes it effective when it comes to unclogging holding tank sensor sending units...but to my knowledge, it won't do a thing when it comes to dissolving sludge in holding tanks. As with most problems, the best cure is prevention...as described in my first reply to this thread. Peggie ---------- Peggie Hall Specializing in marine sanitation since 1987 Author "Get Rid of Boat Odors - A Guide To Marine Sanitation Systems and Other Sources of Aggravation and Odor" http://www.seaworthy.com/html/get_ri...oat_odors.html |
Vinegar Stroke...Peggy Hall???
Messing In Boats wrote:
I just asked her that very question, as I have a holding tank with lots of "residue" in it that prohibits an accurate reading of its level. She suggests putting some Wisk detergent in it to slosh around and clean up the greasy residue so that i can see how much stuff i have in it. Detergent will emulsify any buildup of animal fats (present in waste)...which makes it effective when it comes to unclogging holding tank sensor sending units...but to my knowledge, it won't do a thing when it comes to dissolving sludge in holding tanks. As with most problems, the best cure is prevention...as described in my first reply to this thread. Peggie ---------- Peggie Hall Specializing in marine sanitation since 1987 Author "Get Rid of Boat Odors - A Guide To Marine Sanitation Systems and Other Sources of Aggravation and Odor" http://www.seaworthy.com/html/get_ri...oat_odors.html |
Vinegar Stroke...Peggy Hall???
Peggy,
Will vinegar cause corrosion problems in aluminum holding tanks? Seems like it might, but I don't know. Steve H. "Peggie Hall" wrote in message ... canalman wrote: It has been suggested by someone who *knows*, that vinegar is a good medium for clearing out persistant residue in a narrowboat toilet holding tank. I don't think so. Vinegar will dissolve sea water mineral buildup in hoses, but I've never heard that it will dissolve sludge in holding tanks. Holding tanks should be at least nominally flushed out with a couple of gallons of clean water down the pumpout fitting (because that sends it directly into the bottom of the tank to stir up the sludge) after every pumpout...and thoroughly flushed by doing that several times--until what's being pumped out is only clean water--several times a year. To my knowledge, there is no other way. It has been suggested that it wouldn't be a good idea in plastic tanks as vinegar might harden the seams. Do we have any feed-back before we try it? I've never heard that before either. It appears to me that all the advice you've been getting is bad. -- Peggie ---------- Peggie Hall Specializing in marine sanitation since 1987 Author "Get Rid of Boat Odors - A Guide To Marine Sanitation Systems and Other Sources of Aggravation and Odor" http://www.seaworthy.com/html/get_ri...oat_odors.html |
Vinegar Stroke...Peggy Hall???
Peggy,
Will vinegar cause corrosion problems in aluminum holding tanks? Seems like it might, but I don't know. Steve H. "Peggie Hall" wrote in message ... canalman wrote: It has been suggested by someone who *knows*, that vinegar is a good medium for clearing out persistant residue in a narrowboat toilet holding tank. I don't think so. Vinegar will dissolve sea water mineral buildup in hoses, but I've never heard that it will dissolve sludge in holding tanks. Holding tanks should be at least nominally flushed out with a couple of gallons of clean water down the pumpout fitting (because that sends it directly into the bottom of the tank to stir up the sludge) after every pumpout...and thoroughly flushed by doing that several times--until what's being pumped out is only clean water--several times a year. To my knowledge, there is no other way. It has been suggested that it wouldn't be a good idea in plastic tanks as vinegar might harden the seams. Do we have any feed-back before we try it? I've never heard that before either. It appears to me that all the advice you've been getting is bad. -- Peggie ---------- Peggie Hall Specializing in marine sanitation since 1987 Author "Get Rid of Boat Odors - A Guide To Marine Sanitation Systems and Other Sources of Aggravation and Odor" http://www.seaworthy.com/html/get_ri...oat_odors.html |
Vinegar Stroke...Peggy Hall???
Steve wrote:
Peggy, Will vinegar cause corrosion problems in aluminum holding tanks? Seems like it might, but I don't know. Nope. In fact, it's even recommended to reduce mineral buildup on the electrodes in a Lectra/San. However, it has no benefit in a holding tank that I'm aware of. Peggie ---------- Peggie Hall Specializing in marine sanitation since 1987 Author "Get Rid of Boat Odors - A Guide To Marine Sanitation Systems and Other Sources of Aggravation and Odor" http://www.seaworthy.com/html/get_ri...oat_odors.html |
Vinegar Stroke...Peggy Hall???
Steve wrote:
Peggy, Will vinegar cause corrosion problems in aluminum holding tanks? Seems like it might, but I don't know. Nope. In fact, it's even recommended to reduce mineral buildup on the electrodes in a Lectra/San. However, it has no benefit in a holding tank that I'm aware of. Peggie ---------- Peggie Hall Specializing in marine sanitation since 1987 Author "Get Rid of Boat Odors - A Guide To Marine Sanitation Systems and Other Sources of Aggravation and Odor" http://www.seaworthy.com/html/get_ri...oat_odors.html |
Vinegar Stroke...Peggy Hall???
Not anywhere the corrossion problem that urine will present!
"Steve" wrote in message ... Peggy, Will vinegar cause corrosion problems in aluminum holding tanks? Seems like it might, but I don't know. Steve H. "Peggie Hall" wrote in message ... canalman wrote: It has been suggested by someone who *knows*, that vinegar is a good medium for clearing out persistant residue in a narrowboat toilet holding tank. I don't think so. Vinegar will dissolve sea water mineral buildup in hoses, but I've never heard that it will dissolve sludge in holding tanks. Holding tanks should be at least nominally flushed out with a couple of gallons of clean water down the pumpout fitting (because that sends it directly into the bottom of the tank to stir up the sludge) after every pumpout...and thoroughly flushed by doing that several times--until what's being pumped out is only clean water--several times a year. To my knowledge, there is no other way. It has been suggested that it wouldn't be a good idea in plastic tanks as vinegar might harden the seams. Do we have any feed-back before we try it? I've never heard that before either. It appears to me that all the advice you've been getting is bad. -- Peggie ---------- Peggie Hall Specializing in marine sanitation since 1987 Author "Get Rid of Boat Odors - A Guide To Marine Sanitation Systems and Other Sources of Aggravation and Odor" http://www.seaworthy.com/html/get_ri...oat_odors.html |
Vinegar Stroke...Peggy Hall???
Not anywhere the corrossion problem that urine will present!
"Steve" wrote in message ... Peggy, Will vinegar cause corrosion problems in aluminum holding tanks? Seems like it might, but I don't know. Steve H. "Peggie Hall" wrote in message ... canalman wrote: It has been suggested by someone who *knows*, that vinegar is a good medium for clearing out persistant residue in a narrowboat toilet holding tank. I don't think so. Vinegar will dissolve sea water mineral buildup in hoses, but I've never heard that it will dissolve sludge in holding tanks. Holding tanks should be at least nominally flushed out with a couple of gallons of clean water down the pumpout fitting (because that sends it directly into the bottom of the tank to stir up the sludge) after every pumpout...and thoroughly flushed by doing that several times--until what's being pumped out is only clean water--several times a year. To my knowledge, there is no other way. It has been suggested that it wouldn't be a good idea in plastic tanks as vinegar might harden the seams. Do we have any feed-back before we try it? I've never heard that before either. It appears to me that all the advice you've been getting is bad. -- Peggie ---------- Peggie Hall Specializing in marine sanitation since 1987 Author "Get Rid of Boat Odors - A Guide To Marine Sanitation Systems and Other Sources of Aggravation and Odor" http://www.seaworthy.com/html/get_ri...oat_odors.html |
Vinegar Stroke...Peggy Hall???
Peggie Hall wrote in message ...
canalman wrote: It has been suggested by someone who *knows*, that vinegar is a good medium for clearing out persistant residue in a narrowboat toilet holding tank. I don't think so. Vinegar will dissolve sea water mineral buildup in hoses, but I've never heard that it will dissolve sludge in holding tanks. Holding tanks should be at least nominally flushed out with a couple of gallons of clean water down the pumpout fitting (because that sends it directly into the bottom of the tank to stir up the sludge) after every pumpout...and thoroughly flushed by doing that several times--until what's being pumped out is only clean water--several times a year. To my knowledge, there is no other way. It has been suggested that it wouldn't be a good idea in plastic tanks as vinegar might harden the seams. Do we have any feed-back before we try it? I've never heard that before either. It appears to me that all the advice you've been getting is bad. Thanks Peggy, and everyone else for your advice. As it would seem no harm will be done [though probably no good either!], and the person who suggested this idea owns the boat with the problem, we'll try it out on HIS holding tank first!! Will report back in due course. Tony on the Basingstoke Canal |
Vinegar Stroke...Peggy Hall???
Peggie Hall wrote in message ...
canalman wrote: It has been suggested by someone who *knows*, that vinegar is a good medium for clearing out persistant residue in a narrowboat toilet holding tank. I don't think so. Vinegar will dissolve sea water mineral buildup in hoses, but I've never heard that it will dissolve sludge in holding tanks. Holding tanks should be at least nominally flushed out with a couple of gallons of clean water down the pumpout fitting (because that sends it directly into the bottom of the tank to stir up the sludge) after every pumpout...and thoroughly flushed by doing that several times--until what's being pumped out is only clean water--several times a year. To my knowledge, there is no other way. It has been suggested that it wouldn't be a good idea in plastic tanks as vinegar might harden the seams. Do we have any feed-back before we try it? I've never heard that before either. It appears to me that all the advice you've been getting is bad. Thanks Peggy, and everyone else for your advice. As it would seem no harm will be done [though probably no good either!], and the person who suggested this idea owns the boat with the problem, we'll try it out on HIS holding tank first!! Will report back in due course. Tony on the Basingstoke Canal |
All times are GMT +1. The time now is 03:58 AM. |
Powered by vBulletin® Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Copyright ©2004 - 2014 BoatBanter.com