Home |
Search |
Today's Posts |
|
#1
![]()
posted to aus.sport.sailing,rec.boats.cruising
|
|||
|
|||
![]() "Joe" wrote in message oups.com... Again, here in this marina the average voltage in the water is .5 volts DC. If your marina is of any age the discarded metal in the water can create stray voltage. Joe You people and your dumb metal boats, the problems you cause. To make a battery one needs two dissimilar metals and salt water. You have that in abundance in a marina what with aluminum hulls, steel hulls, various zincs, bronze fittings, stainless steel fittings, copper paint, etc. Steel boats are a menace because steel acts as a cathode so you have to have all these sacrificial anodes (zincs) attached to protect it from slowly being eaten away and plated on more noble metals. Would you allow somebody to pull into the slip next to you and commence to start sandblasting your hull? I doubt it, but that's about what is happening to your boat's bottom and sundry metal fittings when a steel boat parks its ugly ass next to your superior and inert fiberglass boat. Marinas should be required by law to install active cathodic protection and all metal boats should pay enough more for their slips to pay for the costs associated with the protection. Wilbur Hubbard |
#2
![]()
posted to aus.sport.sailing,rec.boats.cruising
|
|||
|
|||
![]()
Wilbur Hubbard wrote:
You people and your dumb metal boats, the problems you cause. To make a battery one needs two dissimilar metals and salt water. You have that in abundance in a marina what with aluminum hulls, steel hulls, various zincs, bronze fittings, stainless steel fittings, copper paint, etc. Steel boats are a menace because steel acts as a cathode so you have to have all these sacrificial anodes (zincs) attached to protect it from slowly being eaten away and plated on more noble metals. Would you allow somebody to pull into the slip next to you and commence to start sandblasting your hull? I doubt it, but that's about what is happening to your boat's bottom and sundry metal fittings when a steel boat parks its ugly ass next to your superior and inert fiberglass boat. Marinas should be required by law to install active cathodic protection and all metal boats should pay enough more for their slips to pay for the costs associated with the protection. Wilbur Hubbard Hi Wilbur, The steel boats that can cause problems are the larger ones using impressed current cathode protection. These guys create a very strong electric field in the vicinity of their vessel that can be very difficult to protect from. But the ordinary steel hulls (the smaller guys you see in marinas) shouldn't cause any more problems than fiberglass or wooden boats using iron keels with welded anodes. Which is really no problems at all. The biggest danger from other boats in a marina is when they are un- or under-protected and use shore power. But even that can be easily dealt with. Of all the things to complain about, Wilbur. ;-) Chuck ----== Posted via Newsfeeds.Com - Unlimited-Unrestricted-Secure Usenet News==---- http://www.newsfeeds.com The #1 Newsgroup Service in the World! 120,000+ Newsgroups ----= East and West-Coast Server Farms - Total Privacy via Encryption =---- |
Reply |
Thread Tools | Search this Thread |
Display Modes | |
|
|
![]() |
||||
Thread | Forum | |||
rec.boats.paddle sea kayaking FAQ | General | |||
A Recreational Boating Message | General | |||
rec.boats.paddle sea kayaking FAQ | General | |||
Dictionary of Paddling Terms :-) | General | |||
rec.boats.paddle sea kayaking FAQ | General |