Home |
Search |
Today's Posts |
#25
![]() |
|||
|
|||
![]()
On Mon, 03 Nov 2003 13:36:10 +0000, Jim Richardson wrote:
-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 On Mon, 03 Nov 2003 11:48:30 -0800, Lloyd Sumpter wrote: Hi, Whenever I need to work on my prop, etc. underwater, I've just slapped on the mask and fins and held my breath. But I've always wondered: why not rig up a hose arrangement to be able to breathe? We're not talking 50-ft depths here, so I'd think it would be pretty safe. Perhaps some kind of non-collapsable hose on the end of a snorkel? Does anyone do this? Why or why not? There are two problems. 1) Unless you have a seperate exhaust path (usually via a valve directly into the water) you can't push the "bad" air, out of the snorkle very far. If the volume of the snorkel tube is a significant fraction of your lung volume, you just pusț the air up the tube, and then draw that same air, back into your lungs. 2) The pressure at say, 7 feet depth, is about 1.5 atmospheres, so you will be drawing in 1 atmos air, against 1.5 atmos pressure on your lungs. Try it. Take a garden hose down to 7 feet, with the other end in the air, (of course, keeping the water out of it) and try taking a breath through it. You will be able to do it, for a while, maybe a minute, by exhaling through your nose, but you'll give your diaphram a real workout. The usual solution, is either a tank+reg with a really long hose in between ![]() you allready have the tank and the regulator, the hose isn't too expensive. I'm guessing most of the respondents here have never "snorkel-dove" (ie mask, fins, hold your breath) to do prop/rudder repairs, etc. (long tube problem covered elsewhere - ie to exhale separately) - A lungful of air pins you pretty tight onto the hull - there's NO WAY you're "upright" or anywhere near 7 ft deep. - (from another response) if you're gonna get hooked on the keel with an "air tube", you will snorkel-diving as well, and in the latter case you have NO air! Pinned to the hull, it's pretty easy to push off and get to the surface. - Um...if I had a tank and regulator, why not just put it on? So I guess, Updated Question: How DO you do "maintenance" on your prop, rudder, etc. underwater? "Snorkel-dive"? Scuba? Pay someone else? Survey says... Lloyd Sumpter "Far Cove" Catalina 36 - put me down for "snorkel-dive" |
Thread Tools | Search this Thread |
Display Modes | |
|
|
![]() |
||||
Thread | Forum | |||
Cheap and Nasty Knotmeter | General |