LinkBack Thread Tools Search this Thread Display Modes
Prev Previous Post   Next Post Next
  #12   Report Post  
posted to rec.boats.cruising
external usenet poster
 
First recorded activity by BoatBanter: Oct 2006
Posts: 549
Default wooden liveaboard

Bob .. strip plank is Strip Plank ..

No, it is not lap stake.

Seriously,, if you don't know the difference between a strip plank and lap
stake constructed wooden boat ...

Your not ignorant, just uninformed about wooden boats.

=========================================
"Bob" wrote in message
ups.com...
On Mar 7, 6:10 am, "NE Sailboat" wrote:
Wood strip construction is strips of wood, say 2" by 2" which is screwed
together as it is assembled on the frame of the boat. The strips are
also
screwed to the frame. Because you are using smaller pieces of wood than
carvel, no bending [ not much anyway ] and the strips are butted tight,
so
no big seams to fill.


is this what some people call "Lap Strake"


Check out the West System site. When Gougen [ spelling?? ] first got
started in epoxy, I believe they used the epoxy with strip plank.


Yes, good book . I bought one in 1982.


I am no expert but I think cold molding uses larger wood such as a
plywood
layed across another piece of wood.


that is one way. the G bros describe using cedar vener about 4"x 1/8"
Basically making your own plywood.

then there is what I hear called strip construction. common on a canoe


To your statement about epoxy and wood .. and the Ugh word.
Do you paint your wood? Would you paint your wood if you have a wood
boat?


just the outside. on my old sprit sailed swampscott sailing dory
(Chappell) I used turpintine-linsed oil- pine tar.

Epoxy is a good covering, better than paint. Both seal and protect.
Epoxy
does it better.


now that statment opens a can of worms im sure some would debate. It
all about intended use.


I think you need to do some reading on wooden boats. Your ignorance of
the
subject is evident.


My dear poster. Did i call you ignorant? Did i even suggest that you
were stupid?

Diffrent regions use similar words to describe diffrent things. in
this case boat construction.

from my humble experince I would use epoxy on a plywood bottom. But
never on a 58' carvel planked bottom.
but I guess you forgot to detemine what we were actually talking about
before deciding to call me ignorant.

GFY




 
Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules

Smilies are On
[IMG] code is Off
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Plans Announced for 30th Annual Port Townsend Wooden Boat Festival [email protected] General 0 April 10th 06 04:29 PM
Dates and details, wooden boat week, Lake Tahoe [email protected] General 2 March 27th 05 02:33 PM
cruising vs liveaboard boats JAXAshby Cruising 2 February 3rd 04 11:22 AM
Wooden Boat Forum Gafffer General 0 September 17th 03 10:57 AM
Sailor's tattoo, must be married too long, Wooden Boat Festival Gould 0738 General 2 September 10th 03 06:38 PM


All times are GMT +1. The time now is 09:31 AM.

Powered by vBulletin® Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Copyright ©2004-2025 BoatBanter.com.
The comments are property of their posters.
 

About Us

"It's about Boats"

 

Copyright © 2017