Home |
Search |
Today's Posts |
#9
![]()
posted to rec.boats.cruising
|
|||
|
|||
![]() "C. S." wrote in message ... As somebody else pointed out the answer to the "no vibation" may be counter balance. There is about one meter of free shaft between the bottom of the boat and the support in front of the prop. Maybe the shaft flexes enough to counterbalance the missing blade? But why is there no power in reverse? C.S. I can't think that's the answer. If the shaft flexes from centrifugal force (and I would hope it wouldn't flex much anyway), it would be pulled toward the single blade rather the opposite direction which would be necessary to counterbalance. That's what probably happens with my saildrive, which can move on the rubber motor mounts, accentuating the shaking. I would expect your shaft to be more rigidly secured than my saildrive, and may not allow this. I can't explain the difference in thrust. Under sail, if your engine is in neutral, does the prop open up and spin ? |
Thread Tools | Search this Thread |
Display Modes | |
|
|
![]() |
||||
Thread | Forum | |||
Unlubberizing the Single Screw Inboard, Part II | General | |||
A freewheeling explanation | Cruising | |||
Changing Prop inwater. (lessons learned) | Cruising | |||
What are the pros and cons of a folding prop? | Cruising | |||
Removing lower unit from 40 hp Johnson outboard - Help? | General |