LinkBack Thread Tools Search this Thread Display Modes
Prev Previous Post   Next Post Next
  #2   Report Post  
posted to rec.boats.cruising
external usenet poster
 
First recorded activity by BoatBanter: Nov 2006
Posts: 51
Default Changing from 2 blade to 3 blade prop?


"terry" skrev i en meddelelse
ps.com...
Thinking of changing to a 3 blade prop?
Westerly 26 foot about 7000 pounds when in the water and occupied.
Engine is a Volvo MD1B (9 HP) with maximum speed of 1800 RPM via a 1:1
forward reverse gear.
Reason for change is we need a new prop.
Also advice some years back from a couple who took a similar size boat
cruising the Caribbean and claimed that the 3 blade was much better,
while experiencing no increased drag under sail!
Would welcome any comments/advice.
Terry


A few years ago, we changed from a two blade Gori propeller to a three
blades Volvo propeller on a 30' Albin Ballad '73 model - priginally
calle a half tonner; roughly same weight as your boat; and almost same
old Volvo Penta (MD 6A) as well ...

Resulted in significant improvements in speed, maneuvrability, "braking
ability" i.e.: Much better control of the boat when motoring -
especially during harbour maneuvres ... Consumption of diesel did not
change as far as we could see... We could not feel or measure any
increase in drag when sailing - that is: Insignificant - not
noticeable - reduction in speed under sail ... and we did not experience
any change in vibrations ...

Should have done it many years ago ...

Recently the old Volvo was changed to a VP 2003 ... That is another big
step "forward": The consumption of diesel did not increase very much and
the "oil consumption" decresed a lot ... and the smoke and smell
disappeared ... and the sound and vibrations from the engine literally
also disappeared ... And the advantages from the three bladed propeller
became even more significant. Should also have done this uprade many
years ago!

--
Flemming Torp
was: Ballad D-251
now: X-342/DEN-61 ...


 
Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules

Smilies are On
[IMG] code is Off
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Unlubberizing the Single Screw Inboard, Part II Chuck Gould General 10 October 13th 06 10:36 PM
A freewheeling explanation Roger Long Cruising 17 June 10th 05 01:39 PM
Changing Prop inwater. (lessons learned) Steve Cruising 3 May 2nd 05 12:08 AM
What are the pros and cons of a folding prop? MLapla4120 Cruising 140 September 9th 04 02:03 AM
Removing lower unit from 40 hp Johnson outboard - Help? Brian Silver General 9 September 29th 03 06:17 PM


All times are GMT +1. The time now is 08:24 AM.

Powered by vBulletin® Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Copyright ©2004-2025 BoatBanter.com.
The comments are property of their posters.
 

About Us

"It's about Boats"

 

Copyright © 2017