To add to the litany of things you should check, how much to you trust
your tach? Does the engine *sound* like it's doing 3600?

On 18 Oct 2006 20:30:38 -0700, "Dennis"
wrote:

Hi!

I've got a 28 foot sailboat, 7800lbs with a 10.5hp engine. It has a 3
blade prop with 10 inch diameter and 9.3 pitch. Prop is in like new
condition, so is the bottom. When I sail, I can push her up to 6 knots.

Though, when I spin the engine at 3600 rpm I only get about 3.5 knots
out of the boat. The engine easily manages more than 4000 rpm, so I
don't think it's an engine problem. I suspect that the prop has the
wrong pitch, but according to the manufacturer it's exactely the right
one.

Why don't I get more than 3.5 knots under power? Does anyone have a
similar configuration or any clues?

Thanks!

Dennis

-----------------------------------------------------------------------------------------------------------
Glen "Wiley" Wilson usenet1 SPAMNIX at world wide wiley dot com
To reply, lose the capitals and do the obvious.

Take a look at cpRepeater, my NMEA data integrator, repeater, and
logger at http://www.worldwidewiley.com/