Home |
Search |
Today's Posts |
#1
![]()
posted to rec.boats.cruising
|
|||
|
|||
![]()
Well, I did the most stupid thing last week ... I have three deck
fittings which read Waste, Water, and Fuel. And at a fuel dock I put two gallons of diesel into the water bladder. DUMB. There was about five gallons of water in the bladder. The next day I pumped out the bladder and removed it. Just wondering - do you think it's wrecked? Any ideas on how to clean it? |
#2
![]()
posted to rec.boats.cruising
|
|||
|
|||
![]()
The best thing would be to replace your bladder.
Cleaning it is not all that bad. It's the smell that remains in the container. Even after a thorough cleaning the water will have the taste of diesel for months. The first thing is to dispose of the diesel and water in a legal manner. Then I used mix dishsoap and drinking water and let it in the bladder overnight and rinse it. I repeat the process about three time. At that stage it will still smell of diesel. After that I fill the bladder (container) with a mixture of Clorox and drinking water and let it in overnight. Even after the water will still have some tracing smell of diesel. I then repeat the Clorox treatment as need it. All summer we had trace of diesel smell and the coffee did not taste as good. After one season it got back to normal. Based on the configuration of the bladder its location and replacement cost it could be easier to replace it. Other people have used steam to clean contaminated bladders or tanks but I have no experience with this process. wrote in message oups.com... Well, I did the most stupid thing last week ... I have three deck fittings which read Waste, Water, and Fuel. And at a fuel dock I put two gallons of diesel into the water bladder. DUMB. There was about five gallons of water in the bladder. The next day I pumped out the bladder and removed it. Just wondering - do you think it's wrecked? Any ideas on how to clean it? |
#3
![]()
posted to rec.boats.cruising
|
|||
|
|||
![]()
wrote:
The best thing would be to replace your bladder. Cleaning it is not all that bad. It's the smell that remains in the container. Even after a thorough cleaning the water will have the taste of diesel for months. The thing is that the fuel permeates the pores of the bladder. I would pitch the old one and get a new one. You might want to consider color coding the deck fills also so that this doesn't happen again. The first thing is to dispose of the diesel and water in a legal manner. Then I used mix dishsoap and drinking water and let it in the bladder overnight and rinse it. I repeat the process about three time. At that stage it will still smell of diesel. After that I fill the bladder (container) with a mixture of Clorox and drinking water and let it in overnight. Even after the water will still have some tracing smell of diesel. I then repeat the Clorox treatment as need it. All summer we had trace of diesel smell and the coffee did not taste as good. After one season it got back to normal. Based on the configuration of the bladder its location and replacement cost it could be easier to replace it. Other people have used steam to clean contaminated bladders or tanks but I have no experience with this process. wrote in message roups.com... Well, I did the most stupid thing last week ... I have three deck fittings which read Waste, Water, and Fuel. And at a fuel dock I put two gallons of diesel into the water bladder. DUMB. There was about five gallons of water in the bladder. The next day I pumped out the bladder and removed it. Just wondering - do you think it's wrecked? Any ideas on how to clean it? |
#4
![]()
posted to rec.boats.cruising
|
|||
|
|||
![]()
Rosalie B. wrote:
"You might want to consider color coding the deck fills also so that this doesn't happen again." Because I am such a dumbass that I don't learn from my mistakes, Rosalie. Huh .. Through the years you've never passed up on a dig. ThankYou to all who responded. Rosalie, You might want to consider walking the plank if you're ever on my sloop! |
#5
![]()
posted to rec.boats.cruising
|
|||
|
|||
![]()
This problem is age old. Now the builders of new sailboats are locating the
potable water intake on the deck close to the bow of the boat. This way it may not be fool proof but close to sailor proof. Color coding is a good idea. Normally light blue for potable water, yellow for diesel and red for gasoline. This way it will match the color coding used on plastic containers. wrote in message oups.com... Rosalie B. wrote: "You might want to consider color coding the deck fills also so that this doesn't happen again." Because I am such a dumbass that I don't learn from my mistakes, Rosalie. Huh .. Through the years you've never passed up on a dig. ThankYou to all who responded. Rosalie, You might want to consider walking the plank if you're ever on my sloop! |
#6
![]()
posted to rec.boats.cruising
|
|||
|
|||
![]() |
#8
![]()
posted to rec.boats.cruising
|
|||
|
|||
![]()
On Mon, 16 Oct 2006 01:31:24 GMT, Peggie Hall
wrote: The good news is, nobody EVER does it a second time. Well, I know someone who almost did it a second time but was stopped short by his brand new, color coded label plates... :-) |
#9
![]()
posted to rec.boats.cruising
|
|||
|
|||
![]()
A friend of mine asked his new girl friend to help him fill his water tank.
While he was working down below about a 1/2 hour later she replied that all three are full. His reply was that I have only 1 water tank. Color coding may not be the complete answer. "Wayne.B" wrote in message ... On Mon, 16 Oct 2006 01:31:24 GMT, Peggie Hall wrote: The good news is, nobody EVER does it a second time. Well, I know someone who almost did it a second time but was stopped short by his brand new, color coded label plates... :-) |
#10
![]()
posted to rec.boats.cruising
|
|||
|
|||
![]()
"Rick" wrote:
A friend of mine asked his new girl friend to help him fill his water tank. While he was working down below about a 1/2 hour later she replied that all three are full. His reply was that I have only 1 water tank. That's the kind of thing I was thinking about. Color coding may not be the complete answer. No, but if they were color coded, he could have said - put water in the blue tank fill (or whatever it was) rather than just saying fill the water tank. I can tell all kinds of stories about people who have put stuff in places that they don't belong. One fuel truck driver put a whole tankful of fuel into a school furnace room where there used to be a tank, but they'd switched from fuel oil to natural gas, and had taken the tank out. Another time the guy dumped a load into a monitoring well. And third delivery person was delivering pool chemicals and managed to generate chlorine gas by putting a chemical in the wrong tank, which meant they had to evacuate kids from a swimming pool in January with snow on the ground - they couldn't even go back to the lockers because there was gas there. "Wayne.B" wrote in message .. . On Mon, 16 Oct 2006 01:31:24 GMT, Peggie Hall wrote: The good news is, nobody EVER does it a second time. Well, I know someone who almost did it a second time but was stopped short by his brand new, color coded label plates... :-) |
Reply |
|
Thread Tools | Search this Thread |
Display Modes | |
|
|
![]() |
||||
Thread | Forum | |||
Drinking RO water - health problems? | Cruising | |||
rec.boats.paddle sea kayaking FAQ | General | |||
Siphons, anti-siphons & wet exhausts | ASA | |||
rec.boats.paddle sea kayaking FAQ | General | |||
Battery Water (revisited) | Electronics |