![]() |
What are the problems with buying a sunk'en boat?
other than engine and all electronics replacement, what are the pit fall to
look for. |
What are the problems with buying a sunk'en boat?
other than engine and all electronics replacement, what are the pit fall
to look for. "Other than" the electrical and engines? Yeesh, how much of a headache are you prepared to put up with, scratch that, PAY FOR? It's one thing to have a boat that's taken on water for a few hours. Totally immersed for a period of days is a whole other issue. Water gets into everything. Depending on the boat's construction, the type of water and the duration the list of things damaged could vary widely. But without better detail it's pointless to describe all the possible problems. What sort of boat are you talking about? A 14' aluminum bass boat? Or a 50' wood hulled aft cabin yacht? |
What are the problems with buying a sunk'en boat?
|
What are the problems with buying a sunk'en boat?
|
What are the problems with buying a sunk'en boat?
one of the problems encountered will be the growth of mold and bacteria
inside of loose laminate structures/bulkheads, etc. .... any place or crevice in which water has penetrated .... the same reason/outcome that requires submerged houses in floods to be essentially be torn apart and totally rebuilt. Especiallly if the boat has any wood 'core' (decks, etc.) you wont know how much water has absorbed into the core structure .... only to rot out later on. Most fiberglass boats have cored decks, cabin tops/sides, .... sometimes transoms and stringers/stiffners, etc. Accelerated corrosion of non-tinned wiring. To be sure ALL the wiring should be replaced. I wouldnt touch a sunken boat with a 10ft. pole .... too risky and too many heartaches if there is any water in the coring. In article , Paul Rood wrote: other than engine and all electronics replacement, what are the pit fall to look for. |
What are the problems with buying a sunk'en boat?
Paul Rood wrote: other than engine and all electronics replacement, what are the pit fall to look for. Paul, before you dive into one, you might consider this thread I started last Nov. My cousin was wanting to get into a paying hobby of rebuilding boats. like damaged, neglected, sunken, etc. it's a lengthy thread, but has some good insight in it . http://groups.google.com/group/rec.b...b10550fcfbc7fe Needless to say. My cousin talkied himself out of it, possibly for realizing too much investment for risky return.... |
What are the problems with buying a sunk'en boat?
don't forget all the electrical wiring
wrote in message ups.com... Paul Rood wrote: other than engine and all electronics replacement, what are the pit fall to look for. Paul, before you dive into one, you might consider this thread I started last Nov. My cousin was wanting to get into a paying hobby of rebuilding boats. like damaged, neglected, sunken, etc. it's a lengthy thread, but has some good insight in it . http://groups.google.com/group/rec.b...b10550fcfbc7fe Needless to say. My cousin talkied himself out of it, possibly for realizing too much investment for risky return.... |
What are the problems with buying a sunk'en boat?
Paul Rood wrote: other than engine and all electronics replacement, what are the pit fall to look for. Is the boat wood, fiberglass, steel or aluminum? How long was it sunk? Was it sunk in fresh or sal****er? Why did it sink? How big is it? Is it a sailboat or powerboat? Is it an open boat or does it have a cabin? What sort of equipment did it have? Will you be able to get a title? Sam |
All times are GMT +1. The time now is 01:04 AM. |
Powered by vBulletin® Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Copyright ©2004 - 2014 BoatBanter.com