Reply
 
LinkBack Thread Tools Search this Thread Display Modes
  #1   Report Post  
posted to rec.boats.cruising
external usenet poster
 
First recorded activity by BoatBanter: Jul 2006
Posts: 105
Default Water heater leak?

Roger Long wrote:
The sink drain "T" into the head intake line works great although
it means a lot of head pumping.


What I meant by lots of head pumping was filling a 13 gallon holding
tank by pumping the head.


You--and most other boat owners too--need to learn to use the "dry" mode
to do more than pump the last of the water out of the bowl. Few people
realize that any manual toilet that's working anywhere near factory
specs can move bowl contents up to 6 linear feet (further if you get
some help from gravity, at least 4' vertically, in the dry mode. You can
cut your flush water by at least 50%, doubling the number of flushes
your tank can hold if you'll do this:

Pump only 2-3x in the wet mode to wet the bowl ahead of use...or add 2-3
cupfuls from the sink ahead of solids. Switch to dry. After use, pump
enough times in the dry mode to move the bowl contents to the
tank...then switch to wet only long enough to rinse the bowl...and back
to dry to push the rinse water through to the tank.

--
Peggie
----------
Peggie Hall
Specializing in marine sanitation since 1987
Author "Get Rid of Boat Odors - A Guide To Marine Sanitation Systems and
Other Sources of Aggravation and Odor"
http://shop.sailboatowners.com/books...ku=90&cat=1304
  #2   Report Post  
posted to rec.boats.cruising
external usenet poster
 
First recorded activity by BoatBanter: Jul 2006
Posts: 172
Default Water heater leak?

"Peggie Hall" wrote tank by pumping the head.

You--and most other boat owners too--need to learn to use the "dry"
mode


It does work and I use a variation of this method. The variation is
only because our Groco, at least, requires more wet strokes to move
paper to the bottom As soon as stuff is out of sight, I switch to
dry.

At the end of any weekend trip or day sail with lots of guests, I do a
long wet flush from empty to be sure the line is clear.

In view of the difficulty most guests have with the regular method,
even with printed instructions, I think I'll just put up with more
frequent trips to the pump out instead of trying to add another lever
sequence.

BTW tightening up that hose clamp has brought the water off pump
cycling of my fresh water pressure set down to only about once every
2 -3 hours. I can't fix the last little drip until I move the pump so
I can get at a metal joint on the tank that is weeping slightly but
it's quite livable. I'll do that when I install the accumulator tank
I bought yesterday.

--

Roger Long




Reply
Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules

Smilies are On
[IMG] code is Off
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
rec.boats.paddle sea kayaking FAQ [email protected] General 0 April 20th 06 05:35 AM
rec.boats.paddle sea kayaking FAQ [email protected] General 0 March 20th 06 05:33 AM
rec.boats.paddle sea kayaking FAQ [email protected] General 0 March 30th 05 06:35 AM
Power cost of idle electric water heater Phil Sherrod Cruising 21 April 3rd 04 04:24 PM
rec.boats.paddle sea kayaking FAQ [email protected] General 0 December 15th 03 09:48 AM


All times are GMT +1. The time now is 11:37 AM.

Powered by vBulletin® Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Copyright ©2004-2025 BoatBanter.com.
The comments are property of their posters.
 

About Us

"It's about Boats"

 

Copyright © 2017