Home |
Search |
Today's Posts |
|
#1
![]()
posted to rec.boats.cruising,rec.boats,alt.sailing.asa
|
|||
|
|||
![]()
On Thu, 02 Feb 2006 21:56:26 -0500, Larry wrote:
homemade anchor light atop the mizzenmast.....a Home Depot, solar-recharged, LED walkway light, the kind you put up a sidewalk in front of your house. That's creative. Was the brightness insufficient? |
#2
![]()
posted to rec.boats.cruising,rec.boats,alt.sailing.asa
|
|||
|
|||
![]()
I bought a Home Depot (OK, Wal Mart) solar powered walkway light and
thought it was waaaay too dim. The LED in this Orca light is unusual in that the dome of the LED seems to have been machined to throw the light radially. The housing of the whole light is very well made. |
#3
![]()
posted to rec.boats.cruising,rec.boats,alt.sailing.asa
|
|||
|
|||
![]() wrote in message ps.com... I bought a Home Depot (OK, Wal Mart) solar powered walkway light and thought it was waaaay too dim. The LED in this Orca light is unusual in that the dome of the LED seems to have been machined to throw the light radially. The housing of the whole light is very well made. The ones I saw that pass the USCG requirements (visible at night for 2 miles) had only three LEDs, but they were mounted in a Fresnel lens cover. RCE |
#4
![]()
posted to rec.boats.cruising,rec.boats,alt.sailing.asa
|
|||
|
|||
![]()
Anybody tried the Bebi elctronics anchor lights?
Gordon "RCE" wrote in message ... wrote in message ps.com... I bought a Home Depot (OK, Wal Mart) solar powered walkway light and thought it was waaaay too dim. The LED in this Orca light is unusual in that the dome of the LED seems to have been machined to throw the light radially. The housing of the whole light is very well made. The ones I saw that pass the USCG requirements (visible at night for 2 miles) had only three LEDs, but they were mounted in a Fresnel lens cover. RCE |
#5
![]()
posted to rec.boats.cruising,rec.boats,alt.sailing.asa
|
|||
|
|||
![]()
Gordon;
I bought a Bebi anchor light and will install it in the spring. Really quick shipment, good email support on questions I had. Drop me a note in 90 days and I'll let you know how hard it was to install. The mast is up so it will be done working from a chair. Ed Being There Pearson 33-2 36 out of Marion, MA Gordon wrote: Anybody tried the Bebi elctronics anchor lights? Gordon "RCE" wrote in message ... |
#6
![]()
posted to rec.boats.cruising,rec.boats,alt.sailing.asa
|
|||
|
|||
![]() |
#7
![]()
posted to rec.boats.cruising,rec.boats,alt.sailing.asa
|
|||
|
|||
![]()
Wayne.B wrote in
: That's creative. Was the brightness insufficient? It was bright enough.....well, until the battery ran dead around midnight. After that, it was DEAD....not good. |
#8
![]()
posted to rec.boats.cruising,rec.boats,alt.sailing.asa
|
|||
|
|||
![]()
On Fri, 03 Feb 2006 22:05:03 -0500, Larry wrote:
It was bright enough.....well, until the battery ran dead around midnight. After that, it was DEAD....not good. It is an absolute requirement that they must stay lit until 1/2 hour after the last pub closes. :-) There should also be an owner sensor that will cause it to start blinking if you get to within 400 yards of it in your dinghy. |
#9
![]()
posted to rec.boats.cruising,rec.boats,alt.sailing.asa
|
|||
|
|||
![]()
I had an idea...some feelback would be great.
I had a low-draw anchor light that we've been hanging from the boom when anchored and simply stowing when underway. It's got a photosensor so is automatic...you know the $40 one from Boatersworld. It's brightness is acceptable but now that it quit working, I want to make a replacement. I was thinking of a really damn bright light (i.e. so even the crazy weekend powerboaters from Miami will see it)...a battery sized to match (12hoursX draw/H) & stored in a cockpit lazarette & coupled with a small solar panel. That way I can have a bright anchor-light while not drawing power from my house batteries. Any suggestions/comments? Thanks. Glenn. s/v Seawing www.seawing.net "Wayne.B" wrote in message ... On Fri, 03 Feb 2006 22:05:03 -0500, Larry wrote: It was bright enough.....well, until the battery ran dead around midnight. After that, it was DEAD....not good. It is an absolute requirement that they must stay lit until 1/2 hour after the last pub closes. :-) There should also be an owner sensor that will cause it to start blinking if you get to within 400 yards of it in your dinghy. |
#10
![]()
posted to rec.boats.cruising,rec.boats,alt.sailing.asa
|
|||
|
|||
![]()
Look at Bebi Electronics, They have one ready to hang.
Gordon "Glenn A. Heslop" wrote in message news:YDYEf.319488$tl.237592@pd7tw3no... I had an idea...some feelback would be great. I had a low-draw anchor light that we've been hanging from the boom when anchored and simply stowing when underway. It's got a photosensor so is automatic...you know the $40 one from Boatersworld. It's brightness is acceptable but now that it quit working, I want to make a replacement. I was thinking of a really damn bright light (i.e. so even the crazy weekend powerboaters from Miami will see it)...a battery sized to match (12hoursX draw/H) & stored in a cockpit lazarette & coupled with a small solar panel. That way I can have a bright anchor-light while not drawing power from my house batteries. Any suggestions/comments? Thanks. Glenn. s/v Seawing www.seawing.net "Wayne.B" wrote in message ... On Fri, 03 Feb 2006 22:05:03 -0500, Larry wrote: It was bright enough.....well, until the battery ran dead around midnight. After that, it was DEAD....not good. It is an absolute requirement that they must stay lit until 1/2 hour after the last pub closes. :-) There should also be an owner sensor that will cause it to start blinking if you get to within 400 yards of it in your dinghy. |