Home |
Search |
Today's Posts |
#10
![]()
posted to rec.boats.cruising
|
|||
|
|||
![]()
Don W wrote:
Actually, when boats do sink it is often because their pumping capacity can't keep up with the new hole long enough for the crew to find and plug it. True, but more often it's because of one or more of the following 1- pump was plenty big enough, but crew wasn't paying attention or even within miles of boat at time of sinking... ask your insurance company, most boats that sink do so at the dock! 2- pump *would* have been plenty big enough to cope with leak but was clogged or inoperable due to some other problem which should have been easily correctable under normal circumstances. Having watched a 5HP waste pump empty a flooded basement in just over an hour (was working on a basement crew, and the hole we were to work in had flooded to the top due to an overnight thunderstorm) I've been impressed by the sight of a 3" hose running at full capacity under the influence of that little gasoline powered pump. Yep. And having bossed US Navy damage control parties, watching 5 guys struggle to lug one of those things into action and then cuss & fume over getting it started, I am very hesitant to say that they are reliable boat-savers. Sure would be nice to have a big pump like that in the engine space slaved to that nice big diesel propulsion motor. Yep, except that anything that kills the engine also kills the pump... and thus the boat. Besides, your engine already has a relatively high capacity pump hooked up to it. All you need do is pipe a Y-valve to a big thrum box in the bilge. Jonathan W. wrote: I am in construction and have spent a lot of time over the years trying to get recalcitrant one cylinder motors to start, whether they be on a trash pump, a chain saw, a compressor or the like. I have also read a lot of stories about Coast guard pumps not starting after they are dropped on board. Been there, done that. This past November I was onboard a boat that hit a ledge in Woods Hole, MA and I can tell you it is sobering to see how ineffectual standard bilge pumps are. A lot of that is due to the piping and/or wiring. If the bilge pump does not have a large relatively straight run overboard, then it's certain to be less effective. And most bilge pumps are undersized to be useful in emergencies... no rule against adding a big hi-capacity emergency pump (properly wired & plumbed of course). The TowBoat US boat that eventually took over from the Coasties put a pair of these on board: http://www.starmarinedepot.com/detai...duct_id=RU1416 I had never seen one before, but plan to buy one. I think the odds of it starting when/if needed are much better than a small gas engine pump. Yes and yes. Thanks for the link. Don't forget a big hand pump too. Right about now is the time for somebody to chime in with "there is no bilge pump of greater capacity than a scared sailor with a bucket" which is hooey. If you doubt me, fill up a 5 gallon bucket in your bath tub, then lift & carry it a few steps to your bathroom sink. Repeat for 20 minutes and report back to the group how many gallons you moved. Actually, this gives me a great idea for a new exercise video... "Bailer-cise! It's a whole-body workout!" Fresh Breezes- Doug King |
Thread Tools | Search this Thread |
Display Modes | |
|
|
![]() |
||||
Thread | Forum | |||
Adding an electrical bilge pump | Boat Building | |||
Adding an electrical bilge pump | Cruising |