A sailing chair
 

On my boat (28' S2), I carry my dinghy on deck and its sorta hard to
see over, but........

My original backstay had a piece of wire cable spliced into it about 6'
off the transom with a stainless clip on it. I am not really sure what
it was for , maybe in lieu of a topping lift to hold the end of the
boom up. When I had a new backstay made, they copied the old one
exactly so I still have it. So........I want to make a chair suspended
from this attachment allowing me to sit in comfort, high enough to see
over the dinghy, steering with teh tiller extension. The chair would
rock with the boat. Any thoughts on how to do this?

wrote in message
ups.com...
On my boat (28' S2), I carry my dinghy on deck and its sorta hard to
see over, but........

My original backstay had a piece of wire cable spliced into it about 6'
off the transom with a stainless clip on it. I am not really sure what
it was for , maybe in lieu of a topping lift to hold the end of the
boom up. When I had a new backstay made, they copied the old one
exactly so I still have it. So........I want to make a chair suspended
from this attachment allowing me to sit in comfort, high enough to see
over the dinghy, steering with teh tiller extension. The chair would
rock with the boat. Any thoughts on how to do this?


It was a topping lift substitute. I used mine exclusively for when I wasn't
using the boat, it was a short trip under engine, or I forgot about it when
I tried to raise the main. g My home-made lazy jacks were fine for
temporarily holding up the boom.

I'm not sure I'd want to use it for chair support... seems like you'd be out
of control and you might do damage to the connection with all that swinging.

--
"j" ganz @@
www.sailnow.com

Not sure what to think of the "damage" possibility. Actually, this
cable is "swaged" on, not spliced which may make it more liable to
damage. If damage was obvious, I could simply cut it off doing surgery
with the trusty Dremel tool and replace it. Not sure, is damage a
serious consideration?

wrote:
Not sure what to think of the "damage" possibility.

How about damage to your spine when the thing breaks with you in the chair?

"Jerry" wrote in message
m...
wrote:
Not sure what to think of the "damage" possibility.

How about damage to your spine when the thing breaks with you in the
chair?


I was thinking about the damage of swinging into other things, but yeah...

--
"j" ganz @@
www.sailnow.com

Your posts continually amaze me.

You do not seem to understand the function of some pretty basic parts of
your boat.

Clip the end of your boom to the little clip when your main is down, buy
an inflatable dinghy, and sit on the deck.




wrote:
On my boat (28' S2), I carry my dinghy on deck and its sorta hard to
see over, but........

My original backstay had a piece of wire cable spliced into it about 6'
off the transom with a stainless clip on it. I am not really sure what
it was for , maybe in lieu of a topping lift to hold the end of the
boom up. When I had a new backstay made, they copied the old one
exactly so I still have it. So........I want to make a chair suspended
from this attachment allowing me to sit in comfort, high enough to see
over the dinghy, steering with teh tiller extension. The chair would
rock with the boat. Any thoughts on how to do this?

Jim:

I am happy to b e able to amaze and annoy you. However, I want a
dinghy I can row so an inflatable wont work.
The purpose of the short cable seemed to be in lieu of a topping lift
but as the boat has ALWAYS had a topping lift I am not sure why it is
really there unless it is there for when the topping lift fails. Once
I did use it in place of the topping lift when I had just re-stepped my
mast aftyer about a years sailing hiatus. For about 15 minutes I just
couldnt figger out why my main wouldnt trim properly and then I
remembered I had not disconnected this thing. Its more trouble than
its worth.

wrote:
Jim:

I am happy to b e able to amaze and annoy you. However, I want a
dinghy I can row so an inflatable wont work.
The purpose of the short cable seemed to be in lieu of a topping lift
but as the boat has ALWAYS had a topping lift I am not sure why it is
really there unless it is there for when the topping lift fails. Once
I did use it in place of the topping lift when I had just re-stepped my
mast aftyer about a years sailing hiatus. For about 15 minutes I just
couldnt figger out why my main wouldnt trim properly and then I
remembered I had not disconnected this thing. Its more trouble than
its worth.


You just said it better than I did.

You don't annoy me, I wouldn't read your posts if they did.

Picturing you swinging from the toping lift while trying to steer is too
bazaar for words.

Jim:

I also thought it was a bizarre image which was why it attracted me.
However, I now agree it prob isnt a good idea. Still, maybe I'll try it
just to see peoples jaws drop.