| Home |
| Search |
| Today's Posts |
|
#2
|
|||
|
|||
|
Your manufacturer probably measured length on deck but marinas measure
length overall including bowsprits/pulpits/anchor platforms. -- Glenn Ashmore I'm building a 45' cutter in strip/composite. Watch my progress (or lack there of) at: http://www.rutuonline.com Shameless Commercial Division: http://www.spade-anchor-us.com wrote in message oups.com... At the end of my aborted cruise, I left my boat at Cortez Cove Marina near Bradenton, FL. As my boat is a 28' S2 with a specified length of 8.5 meters which actually comes out to less than 28', I paid $10/ft/month or $280/month. Now, the marina says THEY have measured it to be 30' and want to charge me $300/month. Very strange. I wonder if I leave it there longer will it continue to grow in length and value at a faster rate than the increased slip fees. I am halfway inclined to simply bring her back to N. Florida where I get a slip for less than half that much and I do not have to put up with such nonsense. |
| Thread Tools | Search this Thread |
| Display Modes | |
|
|
Similar Threads
|
||||
| Thread | Forum | |||
| rec.boats.paddle sea kayaking FAQ | General | |||
| What's a good sail boat to buy to live on? | Cruising | |||
| rec.boats.paddle sea kayaking FAQ | General | |||
| rec.boats.paddle sea kayaking FAQ | General | |||
| Dealing with a boat fire, checking for a common cause | General | |||