Home |
Search |
Today's Posts |
#8
![]() |
|||
|
|||
![]()
I think there are more disadvantages to this system than advantages.
The disadvantages a -another battery to purchase/maintain/eventually replace -locating a battery forward in an area possibly not well designed for batteries -you now have two sets of wiring to route and maintain: battery to windlass and charging system to battery -devising a method of keeping the battery charged but not overcharged/interfere with charging other batteries -lower total power to the windlass than from a big house bank The advantage would seem to be saving money on heavy cable and not having to route this cable through the boat. I just purchased 2/0 tinned battery cable from Hardware Specialties in Seattle for $1.69 per foot. I don't consider this to be that big a cost. I could have bought 2/0 welding cable for $1.04 per foot if I really wanted to save money. I prefer going with the cable as once its installed the work is over. No batteries to maintain and I get full power from my house bank. "Ray Cullum" wrote in message ... I am considering adding a electric windlass to my boat and I would like some opinions on the best way to connect to the electrical system. The windlass will be approximately 40 feet from my house battery bank which is 700amps. It has been suggested to me to place a small battery up close to the windlass so you don't have to run heavy battery cable such a distance and sustain the power loss. Small cable could be run to the battery strictly for recharging. Thanks for the help. Ray Cullum S/V FROLIC |
Thread Tools | Search this Thread |
Display Modes | |
|
|
![]() |
||||
Thread | Forum | |||
Windlass Electrical Connection | General | |||
SL Windlass Problem | Cruising | |||
When You Hear The Heavy Accent & The Poor Phone Connection... HANG UP!! ____ UGYAiMGRr | Electronics | |||
DC electrical system grounding | Electronics | |||
Electrical problem | Electronics |