Home |
Search |
Today's Posts |
#1
![]()
posted to rec.boats.cruising
|
|||
|
|||
![]() If you require a windlass to retrieve your ground tackle then you are restricted to 12 or 24-volt windlasses that, due to the nature of 12 or 24 VDC current, need thumb-thick cables. Stupid, stupid stupid. Why doesn't anybody manufacture a 120 or 240 VAC windlass so as to require less thick cables strung the length of one's boat? A thick cable to the inverter and regular house-type, 30-amp rated wires to a 120 or 40 VAC windlass from a properly-sized inverter would solve the problem. Better yet, try downsizing your boat so as to not require a windlass. Or, perhaps just a large manual winch on the foredeck for those feebles with bad backs or weenie arms? -- Sir Gregory - fully of retrieving his ground tackle by hand and arm strength alone. |
Thread Tools | Search this Thread |
Display Modes | |
|
|
![]() |
||||
Thread | Forum | |||
windlasses | General | |||
Honda EU2000i. Using the 12Volt Output | Electronics | |||
12volt PC Power Supply | Cruising | |||
12volt PC Power Supply | Electronics | |||
12volt fridge | Cruising |