Home |
Search |
Today's Posts |
#11
![]()
posted to rec.boats.cruising
|
|||
|
|||
![]()
"Jessica B" wrote in message
... snip I've seen boats that have these elbow-shaped tubes on the back that have like a cradle/pulley system for dinghies. I guess you have to tie them off so they don't bang around, but at least you aren't towing them. They're called davits. And, they are not really called for on a smaller sailboat. They are quite heavy and bulky for one (not to mention ugly) and they cause the stern to squat which isn't a good thing. The stainless steel tubing I constructed and installed is lightweight and strong. It has the added advantage of being quick-pinned to the fastener points so it can be raised up along the backstay if one so desires. My little, 50-pound, fiberglass dinghy is easy enough to lift up and lay, upside-down atop the carrier with gunwale right up against the backstay where it can be safely lashed down. The extra sixty pounds or so near the transom has little noticable effect on the trim of the hull. These fools who advocate putting the dinghy upside-down on deck don't understand how in-the-way the thing always is. They just saw photos in magazines or heard tell of stowing the dinghy on deck and it becomes a case of monkey-see, monkey-do. It's the same thing with the rows of plastic fuel jugs along the twoXsix along the lifelines. Monkey-see, monkey-do. Nothing uglifies a cruising boat as ugly blue or red plastic jerry cans jury-rigged to the lifelines. Makes me want to puke every time I see it. Wilbur Hubbard |