Reply
 
LinkBack Thread Tools Search this Thread Display Modes
  #1   Report Post  
posted to rec.boats,rec.boats.building,rec.boats.cruising
external usenet poster
 
First recorded activity by BoatBanter: Jan 2010
Posts: 3
Default Winterizing & thermostat questions

I have a Mercruiser 140 hp straight 4 cylinder engine in a boat
which I want to keep in the lake and have available all year.
Usually it doesn't stay cold for long periods at a time here, but
this year it has been freezing or below for about a week or more.
I've kept the motor from freezing by using a handy little item
called a Thermo Cube:

http://tinyurl.com/yeg3jgl

and some lights, but wanted to winterize the motor for while
until things warm back up to normal. There is one drain cock on
the right side of the motor. I emptied that, and then dumped in
antifreeze at the top of the motor where the thermostat goes. I
left the cock open until antifreeze started coming out of it,
then closed it and continued filling with pure antifreeze until
it came to the top of the thermostat opening. That should mix
with whatever little water is left and keep the motor safe from
freezing at least down to zero degrees, right?

Also, I'm wondering if there is any reason to have a thermostat
on a boat that takes water in from the lake. Some people have
told me they are of no use, but others apparently put them in
since there is one in this boat. It is old and looks like it
probably doesn't work any more, and the spring has broken loose
from it. Would it be just as well to get rid of it and not use a
thermostat at all?
  #2   Report Post  
posted to rec.boats,rec.boats.building,rec.boats.cruising
external usenet poster
 
First recorded activity by BoatBanter: Jul 2006
Posts: 813
Default Winterizing & thermostat questions

wrote:
I have a Mercruiser 140 hp straight 4 cylinder engine in a boat
which I want to keep in the lake and have available all year.
Usually it doesn't stay cold for long periods at a time here, but
this year it has been freezing or below for about a week or more.
I've kept the motor from freezing by using a handy little item
called a Thermo Cube:

http://tinyurl.com/yeg3jgl

and some lights, but wanted to winterize the motor for while
until things warm back up to normal. There is one drain cock on
the right side of the motor. I emptied that, and then dumped in
antifreeze at the top of the motor where the thermostat goes. I
left the cock open until antifreeze started coming out of it,
then closed it and continued filling with pure antifreeze until
it came to the top of the thermostat opening. That should mix
with whatever little water is left and keep the motor safe from
freezing at least down to zero degrees, right?

Also, I'm wondering if there is any reason to have a thermostat
on a boat that takes water in from the lake. Some people have
told me they are of no use, but others apparently put them in
since there is one in this boat. It is old and looks like it
probably doesn't work any more, and the spring has broken loose
from it. Would it be just as well to get rid of it and not use a
thermostat at all?


The deep vee hull I ran with a Mercruiser 110 had several engine block
drain cocks.
The manual ought to spell this out.
Removing the thermostat risks running the engine too cold.
Your method of backfilling with (animal-safe) antifreeze keeps the water
as slush even with very low temperatures, unless there are crannies
where no antifreeze reaches.

Brian W
  #3   Report Post  
posted to rec.boats,rec.boats.building,rec.boats.cruising
mgg mgg is offline
external usenet poster
 
First recorded activity by BoatBanter: Jun 2009
Posts: 489
Default Winterizing & thermostat questions


wrote in message
...
I have a Mercruiser 140 hp straight 4 cylinder engine in a boat
which I want to keep in the lake and have available all year.
Usually it doesn't stay cold for long periods at a time here, but
this year it has been freezing or below for about a week or more.
I've kept the motor from freezing by using a handy little item
called a Thermo Cube:

http://tinyurl.com/yeg3jgl

and some lights, but wanted to winterize the motor for while
until things warm back up to normal. There is one drain cock on
the right side of the motor. I emptied that, and then dumped in
antifreeze at the top of the motor where the thermostat goes. I
left the cock open until antifreeze started coming out of it,
then closed it and continued filling with pure antifreeze until
it came to the top of the thermostat opening. That should mix
with whatever little water is left and keep the motor safe from
freezing at least down to zero degrees, right?

Also, I'm wondering if there is any reason to have a thermostat
on a boat that takes water in from the lake. Some people have
told me they are of no use, but others apparently put them in
since there is one in this boat. It is old and looks like it
probably doesn't work any more, and the spring has broken loose
from it. Would it be just as well to get rid of it and not use a
thermostat at all?


Your method of winterizing might be OK, but a 40w bulb in there, as John
says, is a good idea.

Regarding the thermostat, John is also correct there. Engines are designed
to operate most effeciently in a particular temperature range. When you
first start the engine, the thermostat is closed restricting the coolant
flow, until a particular temp is reached. Then it opens, and the coolant
flows and goes to work...attempting to maintain that range in temp.

In the case of a boat, cooled with very cold raw water, the thermostat may
(and does) actually close while running to get the temp back up. Your engine
may seem to run fine without it, but you'll get better fuel economy and
performance with it.

--Mike


  #4   Report Post  
posted to rec.boats,rec.boats.building,rec.boats.cruising
external usenet poster
 
First recorded activity by BoatBanter: Jul 2006
Posts: 10,492
Default Winterizing & thermostat questions

On Wed, 6 Jan 2010 18:13:12 -0800, "mgg" wrote:

In the case of a boat, cooled with very cold raw water, the thermostat may
(and does) actually close while running to get the temp back up. Your engine
may seem to run fine without it, but you'll get better fuel economy and
performance with it.


And longer engine life also. Running cold increases friction and
wear.

  #5   Report Post  
posted to rec.boats,rec.boats.building,rec.boats.cruising
mgg mgg is offline
external usenet poster
 
First recorded activity by BoatBanter: Jun 2009
Posts: 489
Default Winterizing & thermostat questions


"Wayne.B" wrote in message
...
On Wed, 6 Jan 2010 18:13:12 -0800, "mgg" wrote:

In the case of a boat, cooled with very cold raw water, the thermostat may
(and does) actually close while running to get the temp back up. Your
engine
may seem to run fine without it, but you'll get better fuel economy and
performance with it.


And longer engine life also. Running cold increases friction and
wear.


Absolutely correct!

--Mike


Reply
Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules

Smilies are On
[IMG] code is Off
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Winterizing & thermostat questions [email protected] General 7 January 7th 10 03:59 PM
Winterizing & thermostat questions [email protected] Boat Building 4 January 7th 10 05:54 AM
Winterizing Questions Geoff Schultz Cruising 5 October 14th 08 08:47 PM
160 or 140 Thermostat? Geoff 93 RRC General 27 February 25th 04 07:33 PM
Winterizing More questions Mike Elliott General 2 October 21st 03 02:40 PM


All times are GMT +1. The time now is 12:27 PM.

Powered by vBulletin® Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright ©2004-2024 BoatBanter.com.
The comments are property of their posters.
 

About Us

"It's about Boats"

 

Copyright © 2017