About Us

cavelamb

Bruce In Bangkok wrote:
On Sat, 04 Apr 2009 10:47:25 -0500, Brian Whatcott
wrote:

wrote:

If a maker puts a 1.5 design factor on his cable, and
a terminal gives way at 105% of the rated stress, this means the
terminal gives way at 105/150 of the ACTUAL breaking stress -
that's a 70% strength comparison. And the Norseman terminals that gave
way at 70% of rated strength were giving way at 70/150 of ultimate or
47% of ultimate strength.

Brian W
Just go up a size on everything and forget about it, Brian! LOL
Ha! You are talking to Mr Cheap, remember.... I don't think twice
about using aluminum ferrules on rigging and squeezing with a pair of
bolt cutters with the jaws ground to shape.(Copper would be better.)
In that scenario, my idea of adding a safety margin is using TWO
ferrules to hold a hard-eye.
Ferrules cost a quarter or so, not a hundred or so. Hard eyes under a
buck.

All the same, I have a hankering for those bolt up terminals, and I like
the idea of the Suncors, even if I can't beef up their reserve strength,
AND they cost way, WAY more....

Brian W

If you are being cheap why not learn to splice cable. A properly
spliced cable will be about 90% the cable strength and cheap. All you
need to splice it is an ice pick.

Cheers,

Bruce
(bruceinbangkokatgmaildotcom)

And a LARGE box of band aids!

Thread Tools	Search this Thread
Show Printable Version	Search this Thread: Advanced Search
Display Modes
Switch to Linear Mode Switch to Hybrid Mode Threaded Mode

Menu

About Us