Reply
 
LinkBack Thread Tools Search this Thread Display Modes
  #1   Report Post  
posted to rec.boats.building
external usenet poster
 
First recorded activity by BoatBanter: Apr 2008
Posts: 257
Default Delamination with epoxy

On Fri, 19 Sep 2008 07:30:15 -0700 (PDT),
wrote:

On Sep 19, 7:07 am, Brian Nystrom wrote:
wrote:
On my wood Tolman Skiff, I have found a couple of places where two
layers of wood epoxied together are delaminationg. Nothing serious

some snipped

This is West System epoxy and when I mean thinned I mean I simply have
not added thickener like microballoons or microfiber. I did not add
thinner. The epoxy straight from the pumps is mixed and painteed on
the bare wood and allowed to soak in, Then microfiber is then added
to thicken it and strengthen the joint, smeared on evenly and the two
parts are then joined with screws to hold them together. small
amounts of delamination has occurred at two joints that were not
covered with glass


I'm not sniping just gathering information.

Are you saying that the actual glued joint has failed or partially
failed? I'm a bit confused by the word "delaminated".

If the epoxy glue failed but the joint has screws holding it together
how do you know it has failed? Is there movement in the joint now that
wasn't there originally?

I ask as I build stitch and glue dinghys that have no fasteners.
Several are ten years old and exhibit no problems so far and I have
always considered epoxy to be pretty much a life time glue. However,
if someone else is having problems I certainly want to know as I don't
want to sell a dinghy and have it fall in pieces. (don't want my own
to either :-)


Bruce-in-Bangkok
(correct Address is bpaige125atgmaildotcom)
  #2   Report Post  
posted to rec.boats.building
external usenet poster
 
First recorded activity by BoatBanter: Jul 2007
Posts: 42
Default Delamination with epoxy

Bruce in Bangkok writes:

I ask as I build stitch and glue dinghys that have no fasteners.
Several are ten years old and exhibit no problems so far and I have
always considered epoxy to be pretty much a life time glue. However,
if someone else is having problems I certainly want to know as I don't
want to sell a dinghy and have it fall in pieces. (don't want my own
to either :-)

And my boat has seen 22 sailing season so far. No fasteners, just epoxy.
Problems I have had so far have been due to either UV-degradation or
errors in my workmanship.

http://hem.bredband.net/b262106/

--
Martin Schöön "Problems worthy of attack
show their worth by hitting back."
Piet Hein
Reply
Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules

Smilies are On
[IMG] code is Off
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Deck delamination, purchase question, how to do the deal .. question Lester Evans Boat Building 4 June 5th 06 10:12 PM
Delamination, Dodger snaps, and boat Purchase Lester Evans Cruising 4 May 17th 06 07:03 AM
Epoxy fibreglass on top of epoxy primer seagoat Boat Building 2 December 1st 05 11:59 AM
Old epoxy--somewhat OT (but it's an epoxy question) David Todtman Boat Building 10 June 5th 05 03:45 PM
Delamination repair Oysters8 Boat Building 3 September 25th 04 06:53 AM


All times are GMT +1. The time now is 01:03 PM.

Powered by vBulletin® Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Copyright ©2004-2025 BoatBanter.com.
The comments are property of their posters.
 

About Us

"It's about Boats"

 

Copyright © 2017