LinkBack Thread Tools Search this Thread Display Modes
Prev Previous Post   Next Post Next
  #11   Report Post  
posted to rec.boats.cruising,rec.boats.building,sci.engr.mech
external usenet poster
 
First recorded activity by BoatBanter: Jul 2006
Posts: 1,239
Default Potable Water - The Third Way.

On 2007-10-08 18:17:58 -0400, Mark Borgerson said:

Getting rid of the disssolved gases in the headspace and as bubbles
forming on the sides of the tube is going to be a major headache.


Not a headache, an impossibility (they're not really dissolved at that
point though) :-) That, and the increase in pressure due to water vapor
will make this an oscillating, self-quenching system. It'll require
more and more heat as the partial pressures of the non-condensables
increases, and the column heights will drop as the pressure goes up,
with the diffusion path increasing the whole time.


I agree with that part---except for the oscillation part. I think the
processes are slow enough and the thermal and physical masses are high
enough that the oscillations will be damped out and you will see a slow
change to equilibrium with little or no overshoot.


Though I consider this whole discussion impractical, I haven't seen
anyone mention that the fresh-water side will be drawn down fairly
regularly. And, of course, the sea water side will be replenished from
time to time.

Suck hard enough on the fresh-water side and you get even better
"vacuum" at the top. (Dissolved gasses are likely to be a problem,
though.) Cool the fresh-water side and water vapor will condense there
-- the whole point of the exercise.

Thinking only momentarily on a problem that I have little interest
in... if the fresh-water side is evacuated to the point that the
salt-water side is slightly below the top, every once in a while (or
perhaps often), the fresh-water side will be empty and only the
previously-dissolved gasses evacuated.

The required evacuation pumps and one-way valves sound like the problem
at the moment.

--
Jere Lull
Tanzer 28 #4 out of Tolchester, MD
Xan's new pages: http://web.mac.com/jerelull/iWeb/Xan/
Our BVI pages: http://homepage.mac.com/jerelull/BVI/

 
Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules

Smilies are On
[IMG] code is Off
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Internal Fiberglass potable water tank repair Keith Boat Building 2 July 15th 05 02:31 AM
Salt Water/Fresh Water prs General 8 August 26th 04 07:40 PM
Is 5200 or Sikaflex ok in potable water tanks dg Cruising 24 March 5th 04 07:07 AM
Is 5200 or Sikaflex ok in potable water tanks - YES bert Boat Building 0 March 3rd 04 08:19 PM
Fresh-water flushing a raw water system? Jeffrey P. Vasquez Cruising 24 January 28th 04 12:19 AM


All times are GMT +1. The time now is 04:27 PM.

Powered by vBulletin® Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Copyright ©2004-2025 BoatBanter.com.
The comments are property of their posters.
 

About Us

"It's about Boats"

 

Copyright © 2017