LinkBack Thread Tools Search this Thread Display Modes
Prev Previous Post   Next Post Next
  #9   Report Post  
posted to rec.boats.building
external usenet poster
 
First recorded activity by BoatBanter: Aug 2007
Posts: 14
Default Forming rounded corners with Fiberglass and ply.

On Aug 23, 2:09 pm, "Lew Hodgett" wrote:

AH HA, new game plan.
Look at the "roof" of the bimini/dodger of that G/S50..
Think, "How would I make that out of cored fiberglass and use roll up
side and front curtains?".
You simplify comstruction as well as end up with a place to "plant
your solar garden."
It is/was my game plan.
If that interests you, get back to me.
BTW, don't think of it as a telephone booth, think of it as a covered
patio.G
http://LewsSailBoat.googlepages.com/home
Lew


Lew,

A patio is right. It was made for sitting in, not sailing in.

Forward visibility is compromised (smudgy, warped) especially in our
fog and rain. Hard windows would be better. Crew have to fight it to
use the winches (can't even make make a half, never mind a full turn).
It leaks and drips in too many places, even into the companionway. The
boom scrapes and chafes on the stainless tubing, tearing the
sunbrella. It's very ugly, does not fit the lines of the boat, see
here http://tinyurl.com/36ofeo

I have to totally redesign it, or use the boat as a dockside patio, or
sell the boat..

So I want what you say, but with a hard dodger up front, and redesign
the patio cover to make it functional and visually acceptable.

I've been googling the foam, thanks for the lead on that.

I've seen your advert before, in the live-aboard list I think. I'm
sorry to hear you are selling, but I'm sure you have thought about it
and are making a difficult but good decision.

Best wishes,
-Koos.

 
Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules

Smilies are On
[IMG] code is Off
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
heat forming fiberglass Robert Haston Boat Building 1 May 1st 06 11:54 AM
lately, pins burn between hot corners, unless they're short [email protected] ASA 0 April 22nd 05 01:09 PM
there, counters promise through hot corners, unless they're full Alejandro ASA 0 April 8th 05 12:50 PM
Albin O-22 Aux. Engine Owner's Group Forming OwenMcCall General 0 March 18th 05 06:09 PM
New OT group forming Florida Keyz General 4 January 8th 05 03:15 AM


All times are GMT +1. The time now is 09:37 PM.

Powered by vBulletin® Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Copyright ©2004-2025 BoatBanter.com.
The comments are property of their posters.
 

About Us

"It's about Boats"

 

Copyright © 2017