Home |
Search |
Today's Posts |
#1
posted to rec.boats.building
|
|||
|
|||
how to make launching wheels for small boat????
What you want is this product. The "Snap into position feature" is
particularly valuable. http://www.adventuremarine.net/dinghy-accessories.cfm We travelled in Baja in 95 and summer of 96 and saw a lot of bigger dinghies with this type. You need the large diameter inflatable wheels for softish sand. Evan Gatehouse |
#2
posted to rec.boats.building
|
|||
|
|||
how to make launching wheels for small boat????
Evan Gatehouse2 wrote:
What you want is this product. The "Snap into position feature" is particularly valuable. http://www.adventuremarine.net/dinghy-accessories.cfm We travelled in Baja in 95 and summer of 96 and saw a lot of bigger dinghies with this type. You need the large diameter inflatable wheels for softish sand. Considering that the technology exists to make a dinghy you could pick up in one hand, why fart around with wheels & lifting brackets & tackles and all the rest? DSK |
#3
posted to rec.boats.building
|
|||
|
|||
how to make launching wheels for small boat????
Thanks for all your suggestions. We'll be spending the whole Winter in Baja and will be exploring different areas. The beaches will vary from hard packed sand, to loose sand to rocky/shelly areas. (It's been several years since we've been there so I'm trying to remember exactly what the beaches were like). The tires that we just received are 10" pneumatic tires that are @4" wide. We're thinking of mounting them on the transom and juryrig a way to lock them in the down position for launching (and then fold up when not needed). Tires were only $4.99 each so if we can't make them workable, we won't have lost much. I've looked at the commercially available launching wheels (on the web) and they cost a whole bunch more than that. I'd really like to have wheels that work well enough that I'll feel happy launching the boat whenever we feel the whim. Kinda silly carrying a boat that far that I'll keep finding excuses NOT to launch the boat. We're figuring on toting the boat down uninflated. Once inflated in Baja, we plan to either try to fig a way to carry the inflated boat upright at the rear of the RV or (probably) tie it on top of our towed car. We won't be leaving till it starts getting cold up here in NE Washington...but I'm already starting to get excited. I had been a little nervous knowing I'll have to do everything myself (hubby can walk a little...enough to get in/out of the boat...but not enough to count on for help.) The 3rd member of our family, "Princess" (a German Shepherd/Rotweiller mix we think) will also be travelling with us. I just finished making "floorboards" for the raft out of some old thin lexan we had. The floor is an air floor and we were afraid that sharp toe nails would be a problem. Sandy |
#4
posted to rec.boats.building
|
|||
|
|||
how to make launching wheels for small boat????
Per DSK:
Considering that the technology exists to make a dinghy you could pick up in one hand, why fart around with wheels & lifting brackets & tackles and all the rest? Walking a half mile carrying something 10 feet long that weighs, say, 30 pounds gets old after a few trips - especially when there's a wind blowing. It's also really nice to be able to stack other stuff on the dollied boat. -- PeteCresswell |
#5
posted to rec.boats.building
|
|||
|
|||
how to make launching wheels for small boat????
BTW have you seen this?
http://www.alaska.net/~fritzf/Boats/...phib_boats.htm I made something like the centerboard unit for my Sunfish and it works great. J. |
#6
posted to rec.boats.building
|
|||
|
|||
how to make launching wheels for small boat????
John wrote: BTW have you seen this? http://www.alaska.net/~fritzf/Boats/...phib_boats.htm No, I hadn't seen it. Thanks for the link! I've just started looking through it and am betting that I'll find all sorts of projects for current and future boats. Sandy |
#7
posted to rec.boats.building
|
|||
|
|||
how to make launching wheels for small boat????
Per DSK:
Considering that the technology exists to make a dinghy you could pick up in one hand, why fart around with wheels & lifting brackets & tackles and all the rest? (PeteCresswell) wrote: Walking a half mile carrying something 10 feet long that weighs, say, 30 pounds gets old after a few trips - especially when there's a wind blowing. True enough, and it will be bulky & awkward no matter the weight. However, 30 pounds will be better than 75 pounds (and that would be remarkably light for a conventional dinghy) no matter what sort of wheels etc etc you fit it out with. .... It's also really nice to be able to stack other stuff on the dollied boat. That's a good point. Make fewer trips that way. Fresh Breezes- Doug King |
#8
posted to rec.boats.building
|
|||
|
|||
how to make launching wheels for small boat????
"sandy" wrote in message oups.com... John wrote: BTW have you seen this? http://www.alaska.net/~fritzf/Boats/...phib_boats.htm No, I hadn't seen it. Thanks for the link! I've just started looking through it and am betting that I'll find all sorts of projects for current and future boats. Sandy A good source of wide, cheap wheels is your local Goodwill or Salvation Army. Buy one or two Big Wheel toys or some similar children's toy with big, rigid plastic "tires." They are light, reasonably strong, and cannot rust. Used on a simple wooden frame as above, or an inverted "T" that fits in a centerboard trunk, they are great for a very light boat. If the launching dolly gets broken, lost or stolen, you are only out a few bucks and an hour or so of work. For Sandy's situation, even with a transom-mounted set of commercial wheels, she may want a "Big Wheels" dolly at the front to help with the weight. Alex |
Reply |
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Forum | |||
tailpipe in saltwater when launching | General | |||
rec.boats.paddle sea kayaking FAQ | General | |||
rec.boats.paddle sea kayaking FAQ | General | |||
Dictionary of Paddling Terms :-) | General | |||
Where to find ramp stories? | General |