BoatBanter.com

BoatBanter.com (https://www.boatbanter.com/)
-   Boat Building (https://www.boatbanter.com/boat-building/)
-   -   microwave linseed oil (https://www.boatbanter.com/boat-building/6750-microwave-linseed-oil.html)

Rick March 18th 04 10:11 PM

microwave linseed oil
 
William R. Watt wrote:

I've never tried putting a metal container in a microwave ...


Ta da!

but its supposed to be noisy and ruin the microwave oven.


Why is it "supposed" to be noisy and ruin the oven?


What do you suppose your microwave oven is made of?

There is one exception which is a metal container with
a special coating for microwaves.


Did you really spend your own money on that? Think about that one for a
moment. Is the "special coating" conductive? Does it absorb microwaves?
Does it reflect them? Is it made of some miracle material that even
Lockheed and the Air Force don't know about yet?

Rick


Max Camirand March 19th 04 12:44 AM

microwave linseed oil
 
Whenever I've put metal in the microwave (accidentally), it has
produced lots of sparks.

Try putting an AOL CD in an old microwave. Light show!

-m

----
Boatbuilder-friendly small sawmill in Ottawa/Gatineau region.

Backyard Renegade March 19th 04 01:23 AM

microwave linseed oil
 
(William R. Watt) wrote in message ...
Rick ) writes:
William R. Watt wrote:

(caution: It the oil were in a metal container it would have to be put in a
glass or plastic container before going in the microwave.)


Why?


because you can't put metal containers in a microwave oven. they reflect
the microwaves instead of letting them pass through into the stuff inside.
I've never tried putting a metal container in a microwave but its supposed
to be noisy and ruin the microwave oven. There is one exception which is a
metal container with a sepcial coating for microwaves. I have an aluminum
pie plate coated for microwave use which I put under other containers
sometimes to catch drips of condensation.


In the early 80's I worked in the South as a salesman for a company
that sold commercial electronics. We featured a microwave oven by
Texas Instruments that had a pattented thing a ma jig that deflected
microwaves from returning to the point of origin (the "tube"). We
would freak out folks by putting any metal pan full of water in the
microwave without any concequences or the noise and crackles. Of
course it would not heat the water, but you could not blow it up with
a pan. It was a patented device and I have not seen one since.
Warning, this was one commercial microwave speciffically designed not
to be damaged by accidental introduction of metal or other reflective
material into it. DO NOT TRY THIS WITH YOUR TI MICROWAVE! Thanks,
Scotty

Rick March 19th 04 06:47 AM

microwave linseed oil
 
Max Camirand wrote:
Try putting an AOL CD in an old microwave. Light show!


It really is fantastic! I am tempted to put a switch on the light so
that it shows up better! Steel wool is also pretty good.

RicK


Brian Nystrom March 19th 04 02:59 PM

microwave linseed oil
 
Rick wrote:
Max Camirand wrote:

Try putting an AOL CD in an old microwave. Light show!



It really is fantastic! I am tempted to put a switch on the light so
that it shows up better! Steel wool is also pretty good.


This only occurs with very thin coatings or slivers of metal. Placing a
metal spoon or pan in a microwave will have no effect.


Rick March 19th 04 03:28 PM

microwave linseed oil
 
Brian Nystrom wrote:

This only occurs with very thin coatings or slivers of metal. Placing a
metal spoon or pan in a microwave will have no effect.


Which is precisely the point I was trying to make in my first post on
the subject.

Rick


Meindert Sprang March 19th 04 11:10 PM

microwave linseed oil
 
"Brian Nystrom" wrote in message
...
Rick wrote:
Max Camirand wrote:

Try putting an AOL CD in an old microwave. Light show!



It really is fantastic! I am tempted to put a switch on the light so
that it shows up better! Steel wool is also pretty good.


This only occurs with very thin coatings or slivers of metal. Placing a
metal spoon or pan in a microwave will have no effect.


Except when the length of the spoon is exactly a half wavelength of
2.45GHz....

Meindert



dazed and confuzed March 20th 04 12:28 AM

microwave linseed oil
 
Brian Nystrom wrote:
Rick wrote:

Max Camirand wrote:

Try putting an AOL CD in an old microwave. Light show!




It really is fantastic! I am tempted to put a switch on the light so
that it shows up better! Steel wool is also pretty good.



This only occurs with very thin coatings or slivers of metal. Placing a
metal spoon or pan in a microwave will have no effect.

it does in my microwave

--
Life is NOT a dress rehearsal.


Brian Nystrom March 20th 04 05:15 AM

microwave linseed oil
 


dazed and confuzed wrote:
Brian Nystrom wrote:


This only occurs with very thin coatings or slivers of metal. Placing
a metal spoon or pan in a microwave will have no effect.

it does in my microwave


Does what?


dazed and confuzed March 20th 04 01:13 PM

microwave linseed oil
 
Brian Nystrom wrote:


dazed and confuzed wrote:

Brian Nystrom wrote:



This only occurs with very thin coatings or slivers of metal. Placing
a metal spoon or pan in a microwave will have no effect.

it does in my microwave



Does what?

make sparks. from forks and spoons.

--
Life is NOT a dress rehearsal.



All times are GMT +1. The time now is 08:32 AM.

Powered by vBulletin® Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Copyright ©2004 - 2014 BoatBanter.com