Sail hook
 

Sorry! It has been copiously pointed out that I shouldn't use
"buzzwords" in a public forum.... what I need are some canvas maker's
hooks, commonly referred to as "sail" or "bench" hooks: these are cast
iron or forge steel, appx. 3/8" in diameter with an appx. 2.5" circular
hook end (rather like a large shark hook) with the very tip filed to a
sharper point. (in length the point, or scorpion, is commonly the
diameter of the hook body.) This prevents the entire hook body from
entering the canvas and opening a great honking hole.

The other end of the hook, which is six to eight inches overall is
peened and enclosed by a axis swivel for attachment to the working end
of a luff tackle or handy-billy to provide tension on the canvas while
sewing a seam.

I've put up a (VERY!) rough picture of this at
http://www.frayedknotarts.com/hook.html if anyone is interested in
seeing it.

Might make a nice little project and I can sure use some! There should
also be a small but steady business in striking these as I can find no
convenient commercial suply worldwide.

Please reply offline

TIA!

(crosspost to metalworking and boatbuilding)

Sail hook
 

How's this?
http://www.duckworksbbs.com/sailmaking/hook/

A Google for sailmaker hook produced this and others


"Frayed Knots" wrote in message ps.com...
Sorry! It has been copiously pointed out that I shouldn't use
"buzzwords" in a public forum.... what I need are some canvas maker's
hooks, commonly referred to as "sail" or "bench" hooks: these are cast
iron or forge steel, appx. 3/8" in diameter with an appx. 2.5" circular
hook end (rather like a large shark hook) with the very tip filed to a
sharper point. (in length the point, or scorpion, is commonly the
diameter of the hook body.) This prevents the entire hook body from
entering the canvas and opening a great honking hole.

The other end of the hook, which is six to eight inches overall is
peened and enclosed by a axis swivel for attachment to the working end
of a luff tackle or handy-billy to provide tension on the canvas while
sewing a seam.

I've put up a (VERY!) rough picture of this at
http://www.frayedknotarts.com/hook.html if anyone is interested in
seeing it.

Might make a nice little project and I can sure use some! There should
also be a small but steady business in striking these as I can find no
convenient commercial suply worldwide.

Please reply offline

TIA!

(crosspost to metalworking and boatbuilding)

Sail hook
 

On 31 Jan 2006 06:34:33 -0800, "Frayed Knots"
wrote:

Might make a nice little project and I can sure use some! There should
also be a small but steady business in striking these as I can find no
convenient commercial suply worldwide.

Any blacksmith could forge these up for you.

However they'll cost more than $3. That sort of price needs a factory
and re-engineering the design to be easier to make and not so useful
(losing the scorpion point).

Sail hook
 

Jim Conlin: Yep. Duckworks (and others) have that "thing" that passes
for a bench hook, but it bears the same resemblance to what I'd want as
a tricycle to a Harley Servi-car. the link is appreciated, though!

Andy Dingley: They'd better b****y well cost more than $3... A good
sail hook is worth the cost since it's such an integral part of the
sailmaker's toolkit. Without a scorpion (or at least a large nose that
can be filed into a scorpion), it's useful only for holding in a
grommetted hole but does nothing to allow a seaming stitch or for
roping a sail. Also, if it were made with a decorative 360 degree
twist to the shaft, wouldn't that be pretty as well as practical!
Old-time sailmakers either had a local blacksmith make theirs or struck
them themselves, being masters of several disciplines as they needed to
be (canvas experts, ropemakers, riggers, smithys....) but I,
unfortunately, am master of only a few things, and smithing is not
among them.

Someone could make these and, while they wouldn't 'jump' off the shelf,
I'll bet that it wouldn't take too long before they'd become a nice
little item for the smith.

Thanks for all the replies, off and on line!


Vince Brennan