I just purchased a 26" clipper sailboat. It is going to require a lot of
fixingup. The wood inside the fiberglass hull is going to need replacing.
I
do not know how to attach wood to a fiberglass hull, what kind of wood to
use, how to sucessfully remove the interior without damaging the hull. Any
help would be helpful.

A few thoughts, have you checked that the cost of fixing it up makes
financial sense? If it needs that great a level of repair it may be very
expensive.

For FRP I would use an epoxy resin for wood-hull joins. I suggest you get
hold of a book dealing with boat repairs in the area you're working in (FRP)
of the serious rebuild variety. www.amazon.com.

However, before parting with any more money, and given that you come across
as someone who has very limited idea of what to do, ask if you have the
necessary skills to do the work required to a sufficiently high standard (it
could be your life at stake). I would seriously consider cutting your
losses and getting hold of a boat in better condition.

remember that this advice is worth precisely what you paid for it.

Al

"Al" wrote in message
...

However, before parting with any more money, and given that you come
across
as someone who has very limited idea of what to do, ask if you have the
necessary skills to do the work required to a sufficiently high standard
(it
could be your life at stake).

Actually, Tom is a very skilled and talented craftsman, I guess like most of
us on a first time project, we just need pointing in the right direction.

I would seriously consider cutting your losses and getting hold of a boat
in better condition.


If everyone followed this premise, then nothing would ever get restored. I
think a better approach would be to provide the information (if you have it)
that was requested, and allow the person to make their own value (as in
worth) judgements

John-R W says:


We didn't know that.

Actually, Tom is a very skilled and talented craftsman, I guess like most of
us on a first time project, we just need pointing in the right direction.


That changes the picture. From the original post, it certainly looked as
though we had someone who was unsure of what needed to be done, what equipment
and materials to use. When restoring something that your life WILL depend on,
like the hull of a boat, I would rather see Al's response than something like
the recent "car engine in boat" thread where the OP was advised to just weld
the output flange to the outdrive unit and go play.

If everyone followed this premise, then nothing would ever get restored.

I would differ with you there.

I
think a better approach would be to provide the information (if you have it)
that was requested, and allow the person to make their own value (as in
worth) judgements

If someone is of the opinion that the person does not have the ability to make
the repairs well, then , again, I would rather see Al's answer than almost any
other.

Steve
Stephen C. Baker - Yacht Designer
http://members.aol.com/SailDesign/pr...cbweb/home.htm

Stephen,

Thanks for the support, I did try to make it clear that my advice was free
and worth just that. As you say, learning that Mr Ford is a craftsman
changes the picture a little. I believe that cautionary advice can often
act as a way to reassess exactly what is hoped for and exactly how it is
expected to achieve that. From my own experience, it is very easy to get
carried away with something and realise somewhere down the line that more
time and money has been invested than is really wise. It's better to stop
and think about these things before you get that far.

However, this should never stop someone from doing anything. If these
questions are answered acceptably the the person, in this instance
performing a restoration, should then be in a better place from which to
move forwards working more efficiently and effectively with fewer checks
along the way to producing a better quality product. The restorer should
have more confidence in the project and himself.

Al

I have know Tom for going on fifteen years now. He's an old fart like me. He
is a very skillful machinist, and has been involved in many aspects of
manufacturing and repair.

Cautionary advice is always helpful, but, knowing Tom, I'm sure he
considered all that was involved in the restoration of this boat prior to
purchasing it.

Not ever having restored a "boat" before, I think he was just looking for
someone to point him in the right direction. Looking for some very basic
information to get started. I'm sure he would have been a regular on this
NG, and would have probably been able to add some very useful commentary.


"Al" wrote in message
...
Stephen,

Thanks for the support, I did try to make it clear that my advice was free
and worth just that. As you say, learning that Mr Ford is a craftsman
changes the picture a little. I believe that cautionary advice can often
act as a way to reassess exactly what is hoped for and exactly how it is
expected to achieve that. From my own experience, it is very easy to get
carried away with something and realise somewhere down the line that more
time and money has been invested than is really wise. It's better to stop
and think about these things before you get that far.

However, this should never stop someone from doing anything. If these
questions are answered acceptably the the person, in this instance
performing a restoration, should then be in a better place from which to
move forwards working more efficiently and effectively with fewer checks
along the way to producing a better quality product. The restorer should
have more confidence in the project and himself.

Al