aquadrive vs pythondrive
 

Hello all,

I'm Daniël Boekel, member of a waterscout's group in the Netherlands. I'm
engineering a small tugboat wich we are going to build. It will be a
traditional looking boat of 8,6 meters.

I've made a 1:10 model to check all the lines:
http://boekel.nu/foto/05/2005-05model_sleper/index.htm
http://boekel.nu/foto/05/2005-06model_sleper/index.htm

Currently I'm making the last changes to the drawings and I'm trying to ad
as many details as I can.

Here in Holland I come upon two major brands for drive shafts:
Aquadrive and Pythondrive.

Does anyone here have experience with both, or maybe other manufacturers?
I'm especially interrested in:
-durability
-noise (reduction)
-pricedifference

tia,
Daniël
--
www.boekel.nu

Daniël Boekel wrote:


Here in Holland I come upon two major brands for drive shafts:
Aquadrive and Pythondrive.

Does anyone here have experience with both, or maybe other manufacturers?
I'm especially interrested in:
-durability
-noise (reduction)
-pricedifference


When I installed an AquaDrive on my last boat, there was a significant
reduction in both vibration and sound levels.

I will be installing an AquaDrive on the boat I'm building.

Not famaliar with other unit.

Lew

Hi
It is a very good idea to make a model first, but do the model cover
the intire boat structure --- the panels aswell as the ribs ?

If you want an easier and safer way to get the ribs to place the panels
on, check this link ,remember that the concept is, to get both the
panels and a framework, that fit to the engine foundations ,do the deck
beams and the bulkheads in one go, and note that it work different than
the old fasion 90. deg towerds keel line concept.

http://groups.yahoo.com/group/Cyber-Boat/

Now the ribs are as important as the panels, but hands on the best is
to have a framework that fit exactly the panels you unfolded and have
the intire framework before you start the paneling. Much better than
having just a few frames and then place the panels --- and then do the
rest of the frames on site, --- this method do that ,it even do the
engine foundations exact as you done the 3D model . If you have a 3D
model this will provide any framework for any shape hull.

schreef in bericht
oups.com...
Hi
It is a very good idea to make a model first, but do the model cover
the intire boat structure --- the panels aswell as the ribs ?

The full-scale version will indeed be build frame-first, upside-down.

The model was also a test wether the unfolded plates would fit well. (They
did)

Daniël.
--
www.boekel.nu