dingy power
 

This is how it works:=
Off the transom is hung on a light weight rudder hinge, a piece of wood hung
vertical with handle at the top into the dingy, used to swing back and
forth, like an oar.
The bottom end of the vertical wood that's in the water, is fixed a flexible
conveyor belt type material, many flexible materials can be used, this
drives the boat forward when the handle at the top is pulled back and fore.
the length is atleast 24 inches, or longer and 6 inches wide or more.
I feel that it could also control direction, but not as good as a rudder .
...........

reads like "skulling".

"rebel" ) writes:
This is how it works:=
Off the transom is hung on a light weight rudder hinge, a piece of wood hung
vertical with handle at the top into the dingy, used to swing back and
forth, like an oar.
The bottom end of the vertical wood that's in the water, is fixed a flexible
conveyor belt type material, many flexible materials can be used, this
drives the boat forward when the handle at the top is pulled back and fore.
the length is atleast 24 inches, or longer and 6 inches wide or more.
I feel that it could also control direction, but not as good as a rudder .
...........







--
------------------------------------------------------------------------------
William R Watt National Capital FreeNet Ottawa's free community network
homepage: www.ncf.ca/~ag384/top.htm
warning: non-FreeNet email must have "notspam" in subject or it's returned

rebel wrote:
This is how it works:=
Off the transom is hung on a light weight rudder hinge, a piece of wood hung
vertical with handle at the top into the dingy, used to swing back and
forth, like an oar.
The bottom end of the vertical wood that's in the water, is fixed a flexible
conveyor belt type material, many flexible materials can be used, this
drives the boat forward when the handle at the top is pulled back and fore.
the length is atleast 24 inches, or longer and 6 inches wide or more.
I feel that it could also control direction, but not as good as a rudder .
...........


It works for fishes! Why not with foot pedals? I may try a similar
idea on my kayak. Two pull cables with pedal pads.

Terry K

I know that there are a lot of variables to consider, but generally what
kind of speed should I expect from this kind of system verses the level of
effort? I tried it with the normal rigid rudder and didn't notice any
significant boat travel. Anyone have a link to some design guidance?


"rebel" wrote in message
...
This is how it works:=
Off the transom is hung on a light weight rudder hinge, a piece of wood
hung
vertical with handle at the top into the dingy, used to swing back and
forth, like an oar.
The bottom end of the vertical wood that's in the water, is fixed a
flexible
conveyor belt type material, many flexible materials can be used, this
drives the boat forward when the handle at the top is pulled back and
fore.
the length is atleast 24 inches, or longer and 6 inches wide or more.
I feel that it could also control direction, but not as good as a rudder .
...........

"Bruce C." wrote in message
...
I know that there are a lot of variables to consider, but generally what
kind of speed should I expect from this kind of system verses the level of
effort? I tried it with the normal rigid rudder and didn't notice any
significant boat travel. Anyone have a link to some design guidance?


"rebel" wrote in message
...
This is how it works:=
Off the transom is hung on a light weight rudder hinge, a piece of wood
hung
vertical with handle at the top into the dingy, used to swing back and
forth, like an oar.
The bottom end of the vertical wood that's in the water, is fixed a
flexible
conveyor belt type material, many flexible materials can be used, this
drives the boat forward when the handle at the top is pulled back and
fore.
the length is atleast 24 inches, or longer and 6 inches wide or more.
I feel that it could also control direction, but not as good as a rudder
.
...........
Consider a scuba divers flippers around 18 inches long large type.
ideal flexible material would be a tapering from thick to thin at end. [ not
necessary, snake type action ]
Regard stearing one sided strokes according to direction, when on course
start full sweep.

Harry Bryan has developed fin-propelled kayaks. The fin appears to be of
maybe 1/4" Lexan and is operated by foot pedals.
"rebel" wrote in message
...
This is how it works:=
Off the transom is hung on a light weight rudder hinge, a piece of wood
hung
vertical with handle at the top into the dingy, used to swing back and
forth, like an oar.
The bottom end of the vertical wood that's in the water, is fixed a
flexible
conveyor belt type material, many flexible materials can be used, this
drives the boat forward when the handle at the top is pulled back and
fore.
the length is atleast 24 inches, or longer and 6 inches wide or more.
I feel that it could also control direction, but not as good as a rudder .
...........

Sounds kinda like a yuloh - http://www.simplicityboats.com/yulohpage2.html

--
Andrew Butchart



"Bruce C." wrote in message
...
I know that there are a lot of variables to consider, but generally what
kind of speed should I expect from this kind of system verses the level of
effort? I tried it with the normal rigid rudder and didn't notice any
significant boat travel. Anyone have a link to some design guidance?


"rebel" wrote in message
...
This is how it works:=
Off the transom is hung on a light weight rudder hinge, a piece of wood
hung
vertical with handle at the top into the dingy, used to swing back and
forth, like an oar.
The bottom end of the vertical wood that's in the water, is fixed a
flexible
conveyor belt type material, many flexible materials can be used, this
drives the boat forward when the handle at the top is pulled back and
fore.
the length is atleast 24 inches, or longer and 6 inches wide or more.
I feel that it could also control direction, but not as good as a rudder
..
...........