how2 duplicate windvane VANE ?
 

I have a Hydrovane and want to duplicate the vane with something
stronger than the ageing light weight original wooden one.

Vanes on the new windvanes are metal tubing w/lashed on fabric.

Suggestions ?

Appreciatively,

Courtney
--
s/v Mutiny
Rhodes Bounty II
lying Oriental, NC
WDB5619

Courtney Thomas wrote in news:41DEA573.60302
@joimail.com:

I have a Hydrovane and want to duplicate the vane with something
stronger than the ageing light weight original wooden one.

Vanes on the new windvanes are metal tubing w/lashed on fabric.

Suggestions ?

Appreciatively,

Courtney

Many use one cut from aluminum sheeting, Yves Gillenas for one did so on
the 'Jean du Sud'...he is the inventer/designer of the Cape Horn self-
steerer. Also I would check into thin starboard(a high density poly-
ethylene), say 1/8"-1/4" thick. Comes in colors and is UV resistant.

--
"Let bygones be bygones...send a concilliatory PRETZEL to the
Whitehouse!"
"Against stupidity, the very gods themselves contend in vain." -
Friedrich von Schiller
"Ignorant voracity -- a wingless vulture -- can soar only into the depths
of ignominy." Patrick O'Brian

Would sheet aluminum do? I have some paddle blades made out of a discarded
aluminum snow shovel. A local scrap yard sells old aluminum traffic signs
for $5 each.

Courtney Thomas ) writes:
I have a Hydrovane and want to duplicate the vane with something
stronger than the ageing light weight original wooden one.

Vanes on the new windvanes are metal tubing w/lashed on fabric.

Suggestions ?

Appreciatively,

Courtney
--
s/v Mutiny
Rhodes Bounty II
lying Oriental, NC
WDB5619



--
------------------------------------------------------------------------------
William R Watt National Capital FreeNet Ottawa's free community network
homepage: www.ncf.ca/~ag384/top.htm
warning: non-FreeNet email must have "notspam" in subject or it's returned