On Sun, 12 Dec 2004 18:10:49 GMT, Jim vaguely
proposed a theory
.......and in reply I say!:

remove ns from my header address to reply via email

Top posting versus bottom posting, let me explain, scroll down:

Old Nick wrote:
On Sun, 12 Dec 2004 03:54:43 GMT, Jim vaguely
proposed a theory
......and in reply I say!:

remove ns from my header address to reply via email




I would look into the reason you have too keep "snugging them", and
there's reason to look at the burried nuts. Sounds like a plywood core
that's rotten.


Or maybe a bad design that has a foam core with not even "pads"
between the glass where there are pressure plates.


Backing plates won't help if the center is soft.


Which can apply with foam. Same problem occurs. It's best to have
solid "pads" at pressure points, even with backing plates on top.
---
Only worry about the things you can control.

Then you have stuff all to worry about!

There, see? You has to scroll down to read what you could have read
without moving your cursor and scrolling.

So are you arguing for top or bottome posting?

If you had top posted and I had half a brain and had followed the
thread, I could have read your reply without having to scroll. And if
you had trested the post _correctly_ and removed half the crap from
previous posts before you started your bitching, then I would not have
had to scroll.


I don't know why you said "vaguely
proposed a theory . . ."


You tell me how to run the Web, then take exception to a stock joke
headline?


Saying to check the reason for the loose bolts isn't exactly vague. I
know about how today's powerboats are made, and I'll bet he's got some
rot in a piece of structural plywood.

If that's the case, backing plates will not fix it.

No. And I agreed. Sheeeeesh! Bad hair day guy!
---
Only worry about the things you can control.

Then you have stuff all to worry about!