Home |
Search |
Today's Posts |
#1
|
|||
|
|||
Advice: West System and Vinyl Ester
All-
I know little about West System et al and boat hull repair. I need some guidance and appreciate all the help I get. Thanks in advance. My questions: (1) What is West System? Is is a Polyester resin, a Vinyl ester resin, or an Epoxy resin fiberglass repair solution?. How do these compare? I am over simplifying the options? (2) I have heard a lot recently about Vinyl esters as having good properties. What are its pros and cons. If this is not what West System is, from the experts, how does it compare?. Any reputable suppliers? Thank you. Regards. |
#2
|
|||
|
|||
http://www.redrockstore.com/resin.htm
has an article about the three types. "Conrad Hartmann" wrote in message om... All- I know little about West System et al and boat hull repair. I need some guidance and appreciate all the help I get. Thanks in advance. My questions: (1) What is West System? Is is a Polyester resin, a Vinyl ester resin, or an Epoxy resin fiberglass repair solution?. How do these compare? I am over simplifying the options? (2) I have heard a lot recently about Vinyl esters as having good properties. What are its pros and cons. If this is not what West System is, from the experts, how does it compare?. Any reputable suppliers? Thank you. Regards. |
#3
|
|||
|
|||
My questions:
(1) What is West System? Is is a Polyester resin, a Vinyl ester resin, or an Epoxy resin fiberglass repair solution?. WEST, which at least originally stood for something like Woode Epoxy Saturation Technique, is an epoxy. While it may originally have been formulated for coating and bonding wood, it is also used for layup of glass, Kevlar, carbon fiber. The salesmen would probably call it a "system" as they have several hardners, and perhaps more than one base resin, as well as a range of additives that can be used to change the properties of the resin (eg. Colloidal silica a.k.a cabosil is a great thickner for epoxy when you want a bonding paste, or for thickening epoxy so it won't run for small repairs, while microballons are great for making a low density paste that is easily sanded, for fairing). Alternatives to WEST would be epoxies from companies like SP Systems, MAS, System 3. None of which I have any first hand experience with. Vinylester is sort of between polyester and epoxy in both properties and cost. Vinylester is typically quite a bit better than polyester, but not as good as epoxy. But I should include caveats like "it depends what you are doing" How do these compare? I am over simplifying the options? (2) I have heard a lot recently about Vinyl esters as having good properties. What are its pros and cons. If this is not what West System is, from the experts, how does it compare?. Any reputable suppliers? Components of high performance (eg. fighter) aircraft would likely be pre-preg carbon-with-epoxy. Very high performance sailboats where strength and stiffness are very important would probably go with wet layup, vacuum-bagged carbon, Kevlar and epoxy. Apparently lots of offshore racing powerboats are built with vinylester. I would guess some use epoxy too. Most recreational not-super-high-performance sailboats are polyester. Some kep-in-the-water boats use a layer of vinylester to prevent the underlying polyester being eposed to water, as it tends to slowly absorb water. Certainly some boats, probably more expensive than typical, but not where ultimate strength and stiffness were appropriate, would be built completely of vinylester. Boats that are mostly glass cloth are frequently built using polyester or vinylester. To get maximum benefit from Kevlar and carbon fiber, builders would typically use epoxy in boats using significant amounts of carbon and Kevlar. Alexander "Ali" Meller http://www.sailing.org/int505/ |
#4
|
|||
|
|||
On Thu, 16 Sep 2004 15:18:02 -0700, Conrad Hartmann wrote:
All- I know little about West System et al and boat hull repair. I need some guidance and appreciate all the help I get. Thanks in advance. My questions: (1) What is West System? Is is a Polyester resin, a Vinyl ester resin, or an Epoxy resin fiberglass repair solution?. How do these compare? I am over simplifying the options? As you know by now from other responses, "West System" is the name of a group of epoxy resins, hardeners, and related products. I'll just add that they have a pretty good reputation. I've used West epoxies and fillers with good results. You can easily get all of their products from, for example, West Marine (if you are in the USA). [snip] Thank you. Regards. good luck! --Mac |
#5
|
|||
|
|||
It is a very good material for hull repairs.
They publish very good booklets on: 002-970 Wooden Boat Restoration & Repair 002-550 Fiberglass Boat Repair & Maintenance 002-650 Gelcoat Blisters: Diagnosis, Repair & Prevention There are lists of dealers, US and elsewhere at http://www.westsystem.com/ Conrad Hartmann wrote: All- I know little about West System et al and boat hull repair. I need some guidance and appreciate all the help I get. Thanks in advance. My questions: (1) What is West System? Is is a Polyester resin, a Vinyl ester resin, or an Epoxy resin fiberglass repair solution?. How do these compare? I am over simplifying the options? (2) I have heard a lot recently about Vinyl esters as having good properties. What are its pros and cons. If this is not what West System is, from the experts, how does it compare?. Any reputable suppliers? Thank you. Regards. |
#6
|
|||
|
|||
Thank you to those that have responded.
If I were to repair a hull, say a sail boat or a regular power boat, what would best to use: West System (Epoxy solution) or the Vinyl Ester Solution?. Are there advantages and disadvantages? Thanks. Edgar |
#7
|
|||
|
|||
Thank you. The article was quite helpful
Regards. "barry lawson" wrote in message . au... http://www.redrockstore.com/resin.htm has an article about the three types. "Conrad Hartmann" wrote in message om... All- I know little about West System et al and boat hull repair. I need some guidance and appreciate all the help I get. Thanks in advance. My questions: (1) What is West System? Is is a Polyester resin, a Vinyl ester resin, or an Epoxy resin fiberglass repair solution?. How do these compare? I am over simplifying the options? (2) I have heard a lot recently about Vinyl esters as having good properties. What are its pros and cons. If this is not what West System is, from the experts, how does it compare?. Any reputable suppliers? Thank you. Regards. |
#8
|
|||
|
|||
On Fri, 17 Sep 2004 09:39:25 -0700, Conrad Hartmann wrote:
Thank you to those that have responded. If I were to repair a hull, say a sail boat or a regular power boat, what would best to use: West System (Epoxy solution) or the Vinyl Ester Solution?. Are there advantages and disadvantages? Thanks. Edgar Honestly, I don't know much about vinyl esters. It is definitely a common practice to use epoxy as a resin to repair older fiberglass boats originally built with polyester resin. I believe you will be safe if you do this, assuming the work is done correctly. In another recent thread, various people weighed in with the opinion that perfectly acceptable repairs of such boats can be made with polyester. I don't doubt that this is true. Personally, I would use West System epoxy because I am familiar with it. I am not an industry professional, but I have done repairs with West System epoxy, and have not had problems. Good luck! --Mac |
Reply |
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Forum | |||
rec.boats.paddle sea kayaking FAQ | General | |||
rec.boats.paddle sea kayaking FAQ | General | |||
rec.boats.paddle sea kayaking FAQ | General | |||
rec.boats.paddle sea kayaking FAQ | General | |||
rec.boats.paddle sea kayaking FAQ | General |