Home |
Search |
Today's Posts |
|
#2
![]()
posted to rec.boats.building
|
|||
|
|||
![]()
In article ,
says... In article 4bce43e8-93dc-4b85-b754-d1c772a75ff2 @y14g2000yqm.googlegroups.com, says... Thanks, Bruce, for the lenghthy and detailed reply, much appriciated ![]() I need to work out which product to go with I suppose. I was looking at this on eBay: http://cgi.ebay.co.uk/Epoxy-Resin-Ha...item334f06460f How suitable would that be for my application? If not, that seller has a "resin shop", can you see anything in his shop that would do the job? Or if i go with a gelcaot, he has that too: http://stores.shop.ebay.co.uk/resinshop__W0QQ_armrsZ1 Thanks again ![]() Resin is more expensive than paint and as I noted before, guarantee you will have rot soon. IIRC you built a small plywood boat from cheap exterior ply? If this is the case, go to home depot and get some good (not latex) exterior paint, even from the screwup bin a color you like and paint the boat. It's crazy to go with gelcoat or similar on a small boat and spend more painting it than you spent building it... Scotty Sorry folks, I think I posted to the wrong thread here.. Scotty -- Save the Ta'ta's!... http://tinyurl.com/ygqxs5v |
Reply |
Thread Tools | Search this Thread |
Display Modes | |
|
|
![]() |
||||
Thread | Forum | |||
Lazy Jack vs Dutchman Sail Flaking System | Cruising | |||
What NOrth Sails recommends for mainsail flaking | ASA | |||
Gelcoat flaking on inside of hull | Boat Building |