![]() |
1D35 results
Three races: 6th, 9th, and DNF with 9 boats.
Pretty uneventful--just some really poor sailing on my part. In the last race the foredeck kid (a substitute for the regular) grabbed the 3/4 oz. chute instead of the 1.5 oz. and it blew out halfway down the leg. The leach tape parted at the head and it took us a while to recover the sheet from its entanglement with the rudder. We finally dropped out after noticing the fleet was almost out of sight. I take full blame for the fiasco--I could have asked for the lightweight chute to be doused and the correct one brought up, but chose to risk it. Not a good weekend. Max |
1D35 results
Yeah, but did you have fun sailing anyway???
Keep at it. You couldn't have expected any serious sailing at the start. RB 35s5 NY |
1D35 results
"Capt. Rob" wrote in message ups.com... Yeah, but did you have fun sailing anyway??? Keep at it. You couldn't have expected any serious sailing at the start. Honestly, if I'd been able to dominate the fleet from the beginning (highly unlikely for even very experienced racers in a new boat and seasoned fleet), I'd likely not have any desire to continue racing the boat. As it is it's a challenge, and a big one at that. The other sailors and crews are quite good and know the 1D35 well. My mistakes are mostly from not understanding the boat that well. It sails like nothing I've ever sailed before, which isn't bad. Rather it's a very exciting boat and accelerates like a rocket under most points of sail, but it's not terribly forgiving of errors and stupidity. I have a lot to learn, and to answer your question, yeah, I'm having a ball. I love this racing. I'm not happy about having to replace my .75 oz spinnaker so soon, but that's the price one pays to race. I'm hoping the current black sails I'm using will last throughout the rest of this season. I've already ordered a new suit of Mylar/Kevlar/spectra/carbon sails for next season, the loft is that backlogged. Max |
1D35 results
"Maxprop" wrote:
Three races: 6th, 9th, and DNF with 9 boats. Pretty uneventful--just some really poor sailing on my part. The 1D35 is a pretty technical boat. Plus it is far enough up the power curve that the reflexes developed in sailing heavier, lower- powered conventional boats are not really helpful. One of the best texts to help make the transition is Bethwaite's "High Performance Sailing" in which he covers the development of the skiff classes and has a number of clear diagrams showing what works, for example where to aim the boat seeking best VMG on different points of sail in different wind strengths. ... In the last race the foredeck kid (a substitute for the regular) grabbed the 3/4 oz. chute instead of the 1.5 oz. and it blew out halfway down the leg. The leach tape parted at the head and it took us a while to recover the sheet from its entanglement with the rudder. We finally dropped out after noticing the fleet was almost out of sight. I take full blame for the fiasco--I could have asked for the lightweight chute to be doused and the correct one brought up, but chose to risk it. Not a good weekend. How hard was the wind blowing? If you were running DDW there shouldn't have been that much pressure on the chute unless it was blowing pretty good. Fresh Breezes- Doug King |
1D35 results
Max, I have direct dealings with two outfits that make sails for a
certain major sail company and my discounts are even steeper than last season now. I'd put you in direct contact. I make nada on this. I do make some money on the sails I sell at my yard. BTW, I can get the exotic stuff as well and Heart of Gold is about to get a new 140% made from a new-to-the-market material. I'll be posting about it after it's flying. Contact me off-group only. If you are locked into your new sails, I'm sure they'll be great. RB 35s5 NY |
1D35 results
"Capt. Rob" wrote in message oups.com... Max, I have direct dealings with two outfits that make sails for a certain major sail company and my discounts are even steeper than last season now. I'd put you in direct contact. I make nada on this. I do make some money on the sails I sell at my yard. BTW, I can get the exotic stuff as well and Heart of Gold is about to get a new 140% made from a new-to-the-market material. I'll be posting about it after it's flying. Contact me off-group only. If you are locked into your new sails, I'm sure they'll be great. If you'd take the cover off the mainsail and haul it up the mast you might find you don't need to invest in so many different headsails. Sailing under headsail alone is dumb. And, if you took the cover off the compass you might be able to avoid those same rocks you keep running aground on. Just a thought..... Wilbur Hubbard |
1D35 results
wrote in message ps.com... "Maxprop" wrote: Three races: 6th, 9th, and DNF with 9 boats. Pretty uneventful--just some really poor sailing on my part. The 1D35 is a pretty technical boat. Plus it is far enough up the power curve that the reflexes developed in sailing heavier, lower- powered conventional boats are not really helpful. My background in racing is strictly in dinghies. The boat feels sluggish compared with, say, a Snipe or MC Scow. One of the best texts to help make the transition is Bethwaite's "High Performance Sailing" in which he covers the development of the skiff classes and has a number of clear diagrams showing what works, for example where to aim the boat seeking best VMG on different points of sail in different wind strengths. I believe it's the one I've had for some years. Great book. ... In the last race the foredeck kid (a substitute for the regular) grabbed the 3/4 oz. chute instead of the 1.5 oz. and it blew out halfway down the leg. The leach tape parted at the head and it took us a while to recover the sheet from its entanglement with the rudder. We finally dropped out after noticing the fleet was almost out of sight. I take full blame for the fiasco--I could have asked for the lightweight chute to be doused and the correct one brought up, but chose to risk it. Not a good weekend. How hard was the wind blowing? If you were running DDW there shouldn't have been that much pressure on the chute unless it was blowing pretty good. Both offwind legs were broad reaches in 15 kts. plus. On the one in question--the second--the sheet was in rather snugly. One or two other boats had doused the chutes and gone to their genoas. The leach tape began to part at the clew, tore loose to the head, and the tape then parted from the head, allowing the whole mess to drop into the water and suck under the boat and foul the rudder. The whole process happened in less than five seconds. I called the previous owner and asked about that chute. He confirmed that it had seen more use than the 1.5 oz., thanks to light air in the summer on Lake M. I also believe we may have caused a small tear during the jibe at the location where the tear began. Mistakes. Max |
1D35 results
"Capt. Rob" wrote in message oups.com... Max, I have direct dealings with two outfits that make sails for a certain major sail company and my discounts are even steeper than last season now. I'd put you in direct contact. I make nada on this. I do make some money on the sails I sell at my yard. BTW, I can get the exotic stuff as well and Heart of Gold is about to get a new 140% made from a new-to-the-market material. I'll be posting about it after it's flying. Contact me off-group only. If you are locked into your new sails, I'm sure they'll be great. About all the sails in this class seem to come from one loft. I've already paid a fairly substantial downstroke on them, so I'm committed. And I like the ones I've seen on other boats in the fleet. Thanks anyway. I also bought a 3/4 oz. asymmetrical chute from another fleet member today. He has two more and was generous enough to part with one. These are great people to sail with/against. Max |
1D35 results
About all the sails in this class seem to come from one loft. I've
already paid a fairly substantial downstroke on them, so I'm committed. And I like the ones I've seen on other boats in the fleet. Thanks anyway. No problem at all. I just thought I'd make the offer. To put it in perspective, I just ordered a cruise radial mainsail for a Tartan 37, full batten, 3 reefs and it's the same sail rebadged by one of the three largest lofts in the world selling for a "tad more" to put it mildly. My cost for the sail was 1290.00. FX sells their Chinese cross cut for a lot more than that. If everyone's using the same sails, it's best to follow suit...bad pun intended! RB 35s5 NY |
1D35 results
"Maxprop" wrote in message nk.net... "Capt. Rob" wrote in message oups.com.. .. Max, I have direct dealings with two outfits that make sails for a certain major sail company and my discounts are even steeper than last season now. I'd put you in direct contact. I make nada on this. I do make some money on the sails I sell at my yard. BTW, I can get the exotic stuff as well and Heart of Gold is about to get a new 140% made from a new-to-the-market material. I'll be posting about it after it's flying. Contact me off-group only. If you are locked into your new sails, I'm sure they'll be great. About all the sails in this class seem to come from one loft. I've already paid a fairly substantial downstroke on them, so I'm committed. And I like the ones I've seen on other boats in the fleet. Thanks anyway. I also bought a 3/4 oz. asymmetrical chute from another fleet member today. He has two more and was generous enough to part with one. These are great people to sail with/against. good call, Max, I wouldn't trust the boobster either. SBV |
1D35 results
On Jun 26, 8:34 pm, "Maxprop" wrote:
wrote in message ps.com... "Maxprop" wrote: Three races: 6th, 9th, and DNF with 9 boats. Pretty uneventful--just some really poor sailing on my part. The 1D35 is a pretty technical boat. Plus it is far enough up the power curve that the reflexes developed in sailing heavier, lower- powered conventional boats are not really helpful. My background in racing is strictly in dinghies. The boat feels sluggish compared with, say, a Snipe or MC Scow. That's hard to believe. It has far more horsepower per pound than the MC, which is in turn a lot more powerful than the Snipe. OTOH because it's a keelboat, it won't feel as jumpy and certainly will not be as responsive when you move your feet as the small boats. One of the best texts to help make the transition is Bethwaite's "High Performance Sailing" in which he covers the development of the skiff classes and has a number of clear diagrams showing what works, for example where to aim the boat seeking best VMG on different points of sail in different wind strengths. I believe it's the one I've had for some years. Great book. It is, and he carefully lays out how to ell when you want more power, when you want less, and how to prioritize shifts versus pressure depending on the boat's characteristics. While it's true that a good sailor can step into any boat and do well, boats with very different characteristics need to be handled differently.... very differently sometimes. For example, catamaran racing is almost a different sport. How hard was the wind blowing? If you were running DDW there shouldn't have been that much pressure on the chute unless it was blowing pretty good. Both offwind legs were broad reaches in 15 kts. plus. I can see blowing out a 3/4 in that. Bummer. Can't resist Mondy morning q-b'ing.... did you think about running deep to take some pressure off the 'chute while you get set up for a change, then shifting to either reacher or heavier chute? DSK |
1D35 results
wrote in message oups.com... On Jun 26, 8:34 pm, "Maxprop" wrote: wrote in message ps.com... "Maxprop" wrote: Three races: 6th, 9th, and DNF with 9 boats. Pretty uneventful--just some really poor sailing on my part. The 1D35 is a pretty technical boat. Plus it is far enough up the power curve that the reflexes developed in sailing heavier, lower- powered conventional boats are not really helpful. My background in racing is strictly in dinghies. The boat feels sluggish compared with, say, a Snipe or MC Scow. That's hard to believe. It has far more horsepower per pound than the MC, which is in turn a lot more powerful than the Snipe. OTOH because it's a keelboat, it won't feel as jumpy and certainly will not be as responsive when you move your feet as the small boats. It's absolutely more powerful than *anything* I've ever sailed on before. It was actually shocking the first time we planed in roughly a 20 kt. wind in a practice session on a broad/beam reach. The dry boat only weighs 6550, and it shows. We were all hooting and howling for an hour. Talk about adrenaline. As to your other comments, the Snipe was more weight and balance sensitive than the MC, which probably has something to do with the hull planforms. The flat scow tends to be very stable when on its bottom or on plane, and it really isn't that squirrelly when up on an edge. The Snipe, OTOH, is sensitive in any condition. But one learns to adapt, and neither boat gave us any problem, beyond the beginner stages. The 1D35 is quite stable on all points of sail. It's cockpit is large, and while I've been trying to keep movement by the crew to a minimum, they do move around a bit with almost no consequences. On windward legs they sit on the weather rail as railmeat, of course, but off wind they find their places and tend to stay there, with the obvious exception of the bow man who moves back when not in a sail change or spinnaker jibe. I've discovered I can move back and forth between the weather and lee cockpit sides when steering, even in light air, and the boat really doesn't get bent outta shape at all. It's very responsive to even small helm input--the tiller, a large stainless loop, is long and powerful and the high-aspect spade rudder is looong--but not nearly as sensitive to input as say the Snipe. Even the MC, with its smaller rudder, was not as sensitive as the Snipe. One of the best texts to help make the transition is Bethwaite's "High Performance Sailing" in which he covers the development of the skiff classes and has a number of clear diagrams showing what works, for example where to aim the boat seeking best VMG on different points of sail in different wind strengths. I believe it's the one I've had for some years. Great book. It is, and he carefully lays out how to ell when you want more power, when you want less, and how to prioritize shifts versus pressure depending on the boat's characteristics. IIRC, I based most of my dinghy racing on his book. My placings improved about three or four boats after reading and digesting the book. You just aren't going to beat the best sailors in your fleet, no matter what, but it was nice to see their transoms regularly and close-up. While it's true that a good sailor can step into any boat and do well, boats with very different characteristics need to be handled differently.... very differently sometimes. For example, catamaran racing is almost a different sport. Agreed. I find them a bit boring, but that's coming from someone who enjoyed Finns and Lasers, so I'm prejudiced. The Thistle was the most challenging boat for me--keeping the rail out of the water when tacking in heavy weather wasn't my strong suit, and it ships about 100 gallons instantly if the rail buries. How hard was the wind blowing? If you were running DDW there shouldn't have been that much pressure on the chute unless it was blowing pretty good. Both offwind legs were broad reaches in 15 kts. plus. I can see blowing out a 3/4 in that. Bummer. I take the blame. The kid on the bow was a fill-in--our regular wasn't able to be there--and he did a great job. I'd love to keep him as he's about 30 lbs. lighter than my regular guy. But he grabbed the wrong turtle and we hoisted the wrong sail. If I'd been smart I'd have doused it immediately and gone to the 1.5 oz, but I chose to stick with it rather than trade. Bad move, and my fault. Cost us a finish. Can't resist Mondy morning q-b'ing.... did you think about running deep to take some pressure off the 'chute while you get set up for a change, then shifting to either reacher or heavier chute? Nope. Never cross my mind, which was my mistake. That's precisely what one of the other skippers asked me after the race. Not sure you saw it in another post, but that same skipper sold me one of his spare 3/4 oz. asymmetrical in order to keep us "competitive." These are great folks, all. Max |
1D35 results
My background in racing is strictly in dinghies. The boat feels sluggish
compared with, say, a Snipe or MC Scow. That's hard to believe. It has far more horsepower per pound than the MC, which is in turn a lot more powerful than the Snipe. OTOH because it's a keelboat, it won't feel as jumpy and certainly will not be as responsive when you move your feet as the small boats. "Maxprop" wrote: It's absolutely more powerful than *anything* I've ever sailed on before. It was actually shocking the first time we planed in roughly a 20 kt. wind It should plane in less than that... might take a bit of meat on the rail though. ..... As to your other comments, the Snipe was more weight and balance sensitive than the MC, which probably has something to do with the hull planforms. The flat scow tends to be very stable when on its bottom or on plane, and it really isn't that squirrelly when up on an edge. The Snipe, OTOH, is sensitive in any condition. Sensitive yes, but not anywhere near as much power. The 1D35 should be just about as sensitive, but not as jumpy because there is so much more mass involved. For example, it should respond just as readily as the Snipe to 1/2 degree increments on the helm... or 1/100th degree increments... but will not turn as snappily because of the rotational momentum. ..... But one learns to adapt, and neither boat gave us any problem, beyond the beginner stages. The 1D35 is quite stable on all points of sail. It's cockpit is large, and while I've been trying to keep movement by the crew to a minimum, they do move around a bit with almost no consequences. On windward legs they sit on the weather rail as railmeat, of course, but off wind they find their places and tend to stay there, with the obvious exception of the bow man who moves back when not in a sail change or spinnaker jibe. I've discovered I can move back and forth between the weather and lee cockpit sides when steering, even in light air, and the boat really doesn't get bent outta shape at all. I can see that.... but I bet there's a difference in VMG ;) IIRC, I based most of my dinghy racing on his book. My placings improved about three or four boats after reading and digesting the book. You just aren't going to beat the best sailors in your fleet, no matter what, but it was nice to see their transoms regularly and close-up. Heh, coming from a family of very tough minded racers, my expectation is 'yes, you *can* beat the best; in fact you dam well better.' However it takes a lot of homework and a lot of practice. While it's true that a good sailor can step into any boat and do well, boats with very different characteristics need to be handled differently.... very differently sometimes. For example, catamaran racing is almost a different sport. Agreed. I find them a bit boring, but that's coming from someone who enjoyed Finns and Lasers, so I'm prejudiced. The Thistle was the most challenging boat for me--keeping the rail out of the water when tacking in heavy weather wasn't my strong suit, and it ships about 100 gallons instantly if the rail buries. I find Thistles to be not much fun to sail. Responsive yes but very crowded with elbows & knees and painful corners. Plus there is no reason to have diamond stays on a boat, other than that you like shredding spinnakers a couple times a season. They're awesome boats in drifting conditions though. Can't resist Mondy morning q-b'ing.... did you think about running deep to take some pressure off the 'chute while you get set up for a change, then shifting to either reacher or heavier chute? Nope. Never cross my mind, which was my mistake. That's precisely what one of the other skippers asked me after the race. Not sure you saw it in another post, but that same skipper sold me one of his spare 3/4 oz. asymmetrical in order to keep us "competitive." These are great folks, all. A lot of one-design racers are like that. Good close racing is the best fun. A lot of the top guys, including the pros, will help with tuning, give tips on trim & balance, and strategy at specific places (knowing local quirks in weather or current, for example)... right up to the point where you're beating them most of the time. Then, you're supposed to be the one helping *them* ;) Fresh Breezes- Doug King |
1D35 results
wrote in message oups.com... My background in racing is strictly in dinghies. The boat feels sluggish compared with, say, a Snipe or MC Scow. That's hard to believe. It has far more horsepower per pound than the MC, which is in turn a lot more powerful than the Snipe. OTOH because it's a keelboat, it won't feel as jumpy and certainly will not be as responsive when you move your feet as the small boats. "Maxprop" wrote: It's absolutely more powerful than *anything* I've ever sailed on before. It was actually shocking the first time we planed in roughly a 20 kt. wind It should plane in less than that... might take a bit of meat on the rail though. It will, but probably not with an inexperienced skipper driving. It takes an agile crew and sheeting in the main and genoa in a well-timed and coordinated fashion to get it onto plane and keep it there in less than 20kts. At 20 or above, it's a fairly simple process. ..... As to your other comments, the Snipe was more weight and balance sensitive than the MC, which probably has something to do with the hull planforms. The flat scow tends to be very stable when on its bottom or on plane, and it really isn't that squirrelly when up on an edge. The Snipe, OTOH, is sensitive in any condition. Sensitive yes, but not anywhere near as much power. Probably true. The Snipe is somewhat undercanvased. That's part of the class's appeal. The 1D35 should be just about as sensitive, but not as jumpy because there is so much more mass involved. For example, it should respond just as readily as the Snipe to 1/2 degree increments on the helm... or 1/100th degree increments... but will not turn as snappily because of the rotational momentum. The helm is not as responsive on the 1D35 as a typical dinghy racer. While someone who's sailed Catalina 34s, for example, might find my boat to be twitchy by comparison, most dinghy racers find it to be a more sedate machine. That said, the helm is a delight. It's superbly balanced, with just the right amount of weather helm in just about all windspeeds I've encountered. I took a couple of Mumm 30 skippers out for a sail last week and they said they liked the feel of the boat better than their own class racer. Of course such observations are largely subjective and hardly definitive. I've sailed Mumm 30s and I love 'em. ..... But one learns to adapt, and neither boat gave us any problem, beyond the beginner stages. The 1D35 is quite stable on all points of sail. It's cockpit is large, and while I've been trying to keep movement by the crew to a minimum, they do move around a bit with almost no consequences. On windward legs they sit on the weather rail as railmeat, of course, but off wind they find their places and tend to stay there, with the obvious exception of the bow man who moves back when not in a sail change or spinnaker jibe. I've discovered I can move back and forth between the weather and lee cockpit sides when steering, even in light air, and the boat really doesn't get bent outta shape at all. I can see that.... but I bet there's a difference in VMG ;) Depends upon who is on the weather rail. I've got a great winch man who watches me closely. If I drop to the lee side, he'll automatically move to weather to compensate for my movement. I also give him the helm for dead runs--he's a master at steering such legs. I hate them. IIRC, I based most of my dinghy racing on his book. My placings improved about three or four boats after reading and digesting the book. You just aren't going to beat the best sailors in your fleet, no matter what, but it was nice to see their transoms regularly and close-up. Heh, coming from a family of very tough minded racers, my expectation is 'yes, you *can* beat the best; in fact you dam well better.' However it takes a lot of homework and a lot of practice. True, but it's tough to beat those who've sailed a particular class boat for the past 20 years while you've just begun, not to mention that they generally lived on the lake and had 'local knowledge' out the ying yang. During my five years of Snipe racing, I won exactly three races, placed second in about that many, and finished in the top five only about 20 times. I'm not complaining--sailing against such competitors was a great learning experience, and they were always up in the top 20 nationally, so the experience was valid. On all three wins, I was essentially in a match race on the final leg or two, and simply covered the second place boat well. At least that many times I failed to cover, taking a flyer instead, and losing big. While it's true that a good sailor can step into any boat and do well, boats with very different characteristics need to be handled differently.... very differently sometimes. For example, catamaran racing is almost a different sport. Agreed. I find them a bit boring, but that's coming from someone who enjoyed Finns and Lasers, so I'm prejudiced. The Thistle was the most challenging boat for me--keeping the rail out of the water when tacking in heavy weather wasn't my strong suit, and it ships about 100 gallons instantly if the rail buries. I find Thistles to be not much fun to sail. Responsive yes but very crowded with elbows & knees and painful corners. Plus there is no reason to have diamond stays on a boat, other than that you like shredding spinnakers a couple times a season. They're awesome boats in drifting conditions though. I tend to believe Sandy (Gordon) Douglass was a sadist. The boat is anything but comfortable, and while it does ghost very well, it can be a handful in heavier air. It carries a spinnaker almost as large as that of a Lightning, and planes in a very frightening fashion if the crew isn't agile and prepared. But it was the only class worth joining when I was in college at IU (Bloomington). Can't resist Mondy morning q-b'ing.... did you think about running deep to take some pressure off the 'chute while you get set up for a change, then shifting to either reacher or heavier chute? Nope. Never cross my mind, which was my mistake. That's precisely what one of the other skippers asked me after the race. Not sure you saw it in another post, but that same skipper sold me one of his spare 3/4 oz. asymmetrical in order to keep us "competitive." These are great folks, all. A lot of one-design racers are like that. Good close racing is the best fun. A lot of the top guys, including the pros, will help with tuning, give tips on trim & balance, and strategy at specific places (knowing local quirks in weather or current, for example)... right up to the point where you're beating them most of the time. Then, you're supposed to be the one helping *them* ;) I won a race this weekend, mostly because the second place boat had an equipment failure on the final leg, which was a beam reach following a fortuitous wind shift, and he and I were substantially ahead of the fleet, thanks to the fleet taking a flyer and getting nixed by the shift. But I've learned more from that guy and others in the past month than I could ever glean from the few books dedicated to racing larger class keel boats. Everyone has been helpful, some to their own detriment, as I've been finishing better than a couple of them regularly. I'm still known as "the new guy," but that moniker may fall shortly. We've just had another guy join our fleet after buying a boat on the east coast and having it shipped in. Word has it that he's an ace in Melges 20s or something similar. Max Max |
All times are GMT +1. The time now is 07:56 PM. |
Powered by vBulletin® Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Copyright ©2004 - 2014 BoatBanter.com