Home |
Search |
Today's Posts |
|
#1
![]()
posted to alt.sailing.asa
|
|||
|
|||
![]() "Charlie Morgan" wrote in message ... On Mon, 18 Sep 2006 22:41:44 GMT, "Maxprop" wrote: "Rednose" wrote in message roups.com... Been there, done that Kathy. Most all my boats have required serious rescue to get em looking good. If the "hazy finish is a consistent color I wouldscrub off all the old oxidation to a consistent dull color using a non abrasive cleaner with a product called TLC with a blue #3, scrubby pad. Then topcoat with a polymer called Poli - Glo and it'll shine like new..This will not restore color but if all the same tone after scrubbed down will restore a maintence free shine.. tom I'd go slowly with this advice. Poli-Glo and other polymers will eventually peel when exposed to UV. Then it's a job to get it off. Buffing out the gel is the safest and best method. I'm not a fan of polymer overcoatings. Max Totally wrong on all counts. Not surprising, given the source. Totally wrong in your seriously misguided opinion. Go ahead--use that poly crap, but don't come whining back here when it peels and looks like ****. Then again you're probably accustomed to your boat looking like ****. Or do you even own a boat? And by the way, you, like Bluto, are a jackass. Max |
#2
![]()
posted to alt.sailing.asa
|
|||
|
|||
![]() Maxprop wrote: "Charlie Morgan" wrote in message ... On Mon, 18 Sep 2006 22:41:44 GMT, "Maxprop" wrote: "Rednose" wrote in message roups.com... Been there, done that Kathy. Most all my boats have required serious rescue to get em looking good. If the "hazy finish is a consistent color I wouldscrub off all the old oxidation to a consistent dull color using a non abrasive cleaner with a product called TLC with a blue #3, scrubby pad. Then topcoat with a polymer called Poli - Glo and it'll shine like new..This will not restore color but if all the same tone after scrubbed down will restore a maintence free shine.. tom I'd go slowly with this advice. Poli-Glo and other polymers will eventually peel when exposed to UV. Then it's a job to get it off. Buffing out the gel is the safest and best method. I'm not a fan of polymer overcoatings. Max Totally wrong on all counts. Not surprising, given the source. Totally wrong in your seriously misguided opinion. Go ahead--use that poly crap, but don't come whining back here when it peels and looks like ****. Then again you're probably accustomed to your boat looking like ****. Or do you even own a boat? And by the way, you, like Bluto, are a jackass. Max That's an insult. I'd gladly be a jackass, but I never want to be like CWM. |
Thread Tools | Search this Thread |
Display Modes | |
|
|
![]() |
||||
Thread | Forum | |||
Largest Piece Or Smallest Piece First When Laying Fiberglass Cloth Over a Tapered Edge? | Boat Building | |||
Epoxy or Polyester for Fixing Rotten Core on Deck? | Boat Building | |||
So where is...................... | General | |||
Fiberglass loss of strength | Cruising | |||
Fiberglass Hull Repair | Boat Building |