According to the Trucker here at the marina
 

Brand spanking new from the factory 289K
http://www.sabreyachts.com/sailing_y...ge_gallery.php
Someone has a nice present to unwrap in the morning.

Capt. Suzy
35s5
NY

According to the Trucker here at the marina
 

"SUZY" wrote in message
oups.com...
Brand spanking new from the factory 289K
http://www.sabreyachts.com/sailing_y...ge_gallery.php
Someone has a nice present to unwrap in the morning.

Coooool. Maybe when I hit the lottery.
Scout

According to the Trucker here at the marina
 

Save up a bit more, I meet the sabre( pronounced in your best Kennedy
voice "Say Burrrr" ) people today putting the rigging on and found out
the boat cost 500K not the 289 the trucker claimed.

Nice but for the undersized rod rigging.

Capt. Suzy
35s5
NY

According to the Trucker here at the marina
 

Now that's what I'd Call; "AN INTERIOR!"

http://community.webtv.net/tassail/ThomPage

According to the Trucker here at the marina
 

Good boats. American Made.

My preference would be more go and less show.


"SUZY" wrote

Brand spanking new from the factory 289K
http://www.sabreyachts.com/sailing_y...ge_gallery.php
Someone has a nice present to unwrap in the morning.

Capt. Suzy
35s5
NY

According to the Trucker here at the marina
 

If you're using her as a daysailor then you have a good point, as a
livaboard it's nice to have plush comfort and low maintainance.

The boat is IMO a glorified daysailor, one of the best.... but not
really a good cruising boat.

Capt. Suzy
35s5
NY

According to the Trucker here at the marina
 

Bart,

Who gives a **** about speed when your at Anchor, poaching a fresh
caught Salmon with a pot of Coffee Perking. Fresh from a shower, with
fleece slippers and clean "Sweats" on.

ZERO MPH with just a gentle rock and your Dog watching every move you
make, on a boat like that. Things are pretty right with this ol'world
after all.

http://community.webtv.net/tassail/ThomPage

According to the Trucker here at the marina
 

I agree Ol Thom, whats the hurry?

I picked up some pretty good ideals I'm going to put on my boat from
the Saber.

On my steps I've always used a stick on type of non-skid. The Saber has
inlaid brass strips. Easy to do and looks great! Just router in groves
and the brass stock is easy to find, will never mess with stick on
again :0).

Capt. Suzy
35s5
NY

According to the Trucker here at the marina
 

http://www.sabreyachts.com/images/ga...e/int-step.jpg