Nav wrote:


DSK wrote:



A stop-and-lock on a turbine plant takes a bit less skill, since all
you have to do is shut of steam on the ahead throttle and crack open
the astern throttle, then slowly open it further. Less things to
break, too.


You would not disengage the main gearbox? Do you think the main turbine
gets spun backwards by the reversing turbine? Two other common methods
are CPP and clutches with reversing gears (the clutches are particularly
interesting from an engineering aspect).

Cheers

In my experience, with pure steam turbine plants, if you are at "sea
speeds", to stop the HP turbine you first have to pull out the extra
nozzles, then shut down the steam, then open the "guarding valve", and
when the shaft has stopped or nearly so, you can start cracking steam to
the LP turbine .... not the quickest of procedures.
There are no clutches or methods to disengage the main gearbox
(reduction gears).
For direct drive diesel (majority of ships nowadays) there are no
clutches or reversing gears.

otn