Reply
 
LinkBack Thread Tools Search this Thread Display Modes
  #1   Report Post  
BB
 
Posts: n/a
Default Wineglass Wherry

Has anyone built or used the Wineglass Wherry offered by Pigmy Boats?
http://www.pygmyboats.com/mall/WGWSPECS.asp

It's an attractive design and light weight too.

Looking to build, just don't know what yet..........

Bill



  #2   Report Post  
Ed Lindsey
 
Posts: n/a
Default Wineglass Wherry

One of my neighbors has a partially completed Wineglass Wherry in his
garage. Seems it was partially complete when he moved in 2 years ago.......
My comment speaks more to his diligence than the difficulty of building a
Pygmy kit.

About 5 years ago I decided to build a kayak, visited the Pygmy Boatworks
and left with a Coho kit. Overall quality was excellent. Took me about 20%
longer then estimated to build, came in within 1-1/2 lbs of design weight,
documentation was accurate and complete.

IMHO, If the Wineglass meets your intended use, you'll be happy with the
Pygmy's kit.

Ed

I built a Coho about 5 years back. Fast, light weight, swee lines.
"BB" wrote in message
...
Has anyone built or used the Wineglass Wherry offered by Pigmy Boats?
http://www.pygmyboats.com/mall/WGWSPECS.asp

It's an attractive design and light weight too.

Looking to build, just don't know what yet..........

Bill





  #3   Report Post  
Backyard Renegade
 
Posts: n/a
Default Wineglass Wherry

"BB" wrote in message ...
Has anyone built or used the Wineglass Wherry offered by Pigmy Boats?
http://www.pygmyboats.com/mall/WGWSPECS.asp

It's an attractive design and light weight too.

Looking to build, just don't know what yet..........

Bill


Heard good things about their kits. Jelous of their CNC machine, ugh.
Anyway, as to the Wherry, I would probably build it from a kit, with
everything already cut out, but it always seemed like there were just
to many panels for S+T. What I mean is, if I were going to cut out
that many panels, I might just as well cut some frames to, cut the
panels out of plank, rivet them together, and make a "real"
boat...grin
Scotty from SmallBoats.com
  #4   Report Post  
Brian D
 
Posts: n/a
Default Wineglass Wherry

Well ...I'd rather cut lots of panels and fit them to temporary molds than
cut out permanent frames that end up in the boat. Due to cleaning and
drainage issue, and the muck that always ends up trapped everywhere, and the
time it takes to cut bevels on frames etc, I don't expect to build framed
boats for personal use anymore. If I recreate something beautiful and
traditional, then super, I'll do it. For daily use stuff, no way.
Stitch-n-tape boats clean out like hosing out a bathtub

Brian

--
My boat project: http://www.advantagecomposites.com/tongass


"Backyard Renegade" wrote in message
om...
"BB" wrote in message

...
Has anyone built or used the Wineglass Wherry offered by Pigmy Boats?
http://www.pygmyboats.com/mall/WGWSPECS.asp

It's an attractive design and light weight too.

Looking to build, just don't know what yet..........

Bill


Heard good things about their kits. Jelous of their CNC machine, ugh.
Anyway, as to the Wherry, I would probably build it from a kit, with
everything already cut out, but it always seemed like there were just
to many panels for S+T. What I mean is, if I were going to cut out
that many panels, I might just as well cut some frames to, cut the
panels out of plank, rivet them together, and make a "real"
boat...grin
Scotty from SmallBoats.com



  #5   Report Post  
BB
 
Posts: n/a
Default Wineglass Wherry

That's how I feel about my Moccasin canoe, built from plans.
Even with minor scarffing (overlap) I enjoyed the process but not as much as
the use of the craft.


"Brian D" wrote in message
news:B0_Ib.33414$xX.104998@attbi_s02...
Well ...I'd rather cut lots of panels and fit them to temporary molds than
cut out permanent frames that end up in the boat. Due to cleaning and
drainage issue, and the muck that always ends up trapped everywhere, and

the
time it takes to cut bevels on frames etc, I don't expect to build framed
boats for personal use anymore. If I recreate something beautiful and
traditional, then super, I'll do it. For daily use stuff, no way.
Stitch-n-tape boats clean out like hosing out a bathtub

Brian

--
My boat project: http://www.advantagecomposites.com/tongass


"Backyard Renegade" wrote in message
om...
"BB" wrote in message

...
Has anyone built or used the Wineglass Wherry offered by Pigmy Boats?
http://www.pygmyboats.com/mall/WGWSPECS.asp

It's an attractive design and light weight too.

Looking to build, just don't know what yet..........

Bill


Heard good things about their kits. Jelous of their CNC machine, ugh.
Anyway, as to the Wherry, I would probably build it from a kit, with
everything already cut out, but it always seemed like there were just
to many panels for S+T. What I mean is, if I were going to cut out
that many panels, I might just as well cut some frames to, cut the
panels out of plank, rivet them together, and make a "real"
boat...grin
Scotty from SmallBoats.com





Reply
Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules

Smilies are On
[IMG] code is Off
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Chesapeake Annapolis Wherry Dave W Boat Building 0 October 21st 03 02:27 PM


All times are GMT +1. The time now is 04:38 PM.

Powered by vBulletin® Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright ©2004-2024 BoatBanter.com.
The comments are property of their posters.
 

About Us

"It's about Boats"

 

Copyright © 2017