Home |
Search |
Today's Posts |
#1
|
|||
|
|||
Sikkens Cetol
Anyone use cetol on a mast,
I know that a lot of people recommend it for teak brightwork, but what about a Spruce mast and boom? garry |
#2
|
|||
|
|||
Sikkens Cetol
"Gcrothers" wrote in message
... Anyone use cetol on a mast, I know that a lot of people recommend it for teak brightwork, but what about a Spruce mast and boom? Works ok for me. I have put it on the spars of a 10ft lapstrake dinghy. Easy to apply (no sanding between coats) and is very durable. The PU on the dinghy was pretty damaged after a few holidays of (ab-)use by the kids, but the spars still are in very good condition. Meindert |
#3
|
|||
|
|||
Sikkens Cetol
"Meindert Sprang" wrote in message ... Works ok for me. I have put it on the spars of a 10ft lapstrake dinghy. Easy to apply (no sanding between coats) and is very durable. The PU on the dinghy was pretty damaged after a few holidays of (ab-)use by the kids, but the spars still are in very good condition. Meindert Many thanks for the reply. I will give it a go and see how she does regards garry |
Reply |
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Forum | |||
Sikkens Cetol Removal | General |