Reply
 
LinkBack Thread Tools Search this Thread Display Modes
  #1   Report Post  
posted to rec.boats.building
external usenet poster
 
First recorded activity by BoatBanter: Sep 2006
Posts: 4
Default Waterproofing Aluminum Riveted Boats

MMC..thanks for your advise.
I looked up this product on the net and it seems like if I do use this
I would be applying this along the seams where the rivets are inside
the boat.
Not sure where I can pick up this product and how much would be
required for a 14ft boat.

Gary

MMC wrote:
I would think a good, thick paint on the outside of the hull would work
better than what you propose. Coal tar epoxy would seal it up real well and
not cost an arm and a leg.
MMC
wrote in message
oups.com...
I recently inherited a 14 foot aluminum riveted boat from a family
friend.
This boat is in decent shape and I was advised there are no current
leaks with this boat.
I am planning to fix this boat up a bit by putting in floor
boards/carpeting and a few swivel seats.

My question is, is there something I can spray or apply to the bottom
of the boat (inside) that will make it waterproof?
I watched a show on the channel World Fishing Network where a couple of
hosts sprayed something and made the boat waterproof. I just cant
remember what it is.

I am trying to avoid having to use putty or something to make bandage
solutions to any leaks.

This is my first boat so any help is much much appreciated.

Thanks,
Gary


  #2   Report Post  
posted to rec.boats.building
MMC MMC is offline
external usenet poster
 
First recorded activity by BoatBanter: Jul 2006
Posts: 541
Default Waterproofing Aluminum Riveted Boats

Gary,
Think if you called a local paint store they'd be able to hook you up. I
mentioned coal tar epoxy as it's the cheapest way to go with epoxy, but I
used Sherwin Williams "Marine Industrial Coating" epoxy for barrier coat on
my big FG boat and it's done a great job for less than half the cost of
anything sold at the boat stuff store.
If you're just doing seams, check out 3M 5200. Not sure about using on
aluminium, but if you use it on a plastic boat it's a real job getting it
back off. It's a polysulfide sealant and a heck of an adhesive.
MMC

wrote in message
ups.com...
MMC..thanks for your advise.
I looked up this product on the net and it seems like if I do use this
I would be applying this along the seams where the rivets are inside
the boat.
Not sure where I can pick up this product and how much would be
required for a 14ft boat.

Gary

MMC wrote:
I would think a good, thick paint on the outside of the hull would work
better than what you propose. Coal tar epoxy would seal it up real well
and
not cost an arm and a leg.
MMC
wrote in message
oups.com...
I recently inherited a 14 foot aluminum riveted boat from a family
friend.
This boat is in decent shape and I was advised there are no current
leaks with this boat.
I am planning to fix this boat up a bit by putting in floor
boards/carpeting and a few swivel seats.

My question is, is there something I can spray or apply to the bottom
of the boat (inside) that will make it waterproof?
I watched a show on the channel World Fishing Network where a couple of
hosts sprayed something and made the boat waterproof. I just cant
remember what it is.

I am trying to avoid having to use putty or something to make bandage
solutions to any leaks.

This is my first boat so any help is much much appreciated.

Thanks,
Gary




  #3   Report Post  
posted to rec.boats.building
external usenet poster
 
First recorded activity by BoatBanter: Aug 2006
Posts: 27
Default Waterproofing Aluminum Riveted Boats

5200 is probably the best choice, but you can buy brush-on/roll-on truck
bedliner goop for about $80 for a gallon, which is enough to do an entire
pickup truck bed. Applied on the outside of the hull to cover the wetted
area (i.e. below the waterline) it would certainly seal the hull from leaks
and add a bit of protection against abrasion, etc. It's available in colors
if you want to get a bit fancy. Look at JCWhitney.com or do a Google search
on "bedliner kit".

Alex

"MMC" wrote in message
...
Gary,
Think if you called a local paint store they'd be able to hook you up. I
mentioned coal tar epoxy as it's the cheapest way to go with epoxy, but I
used Sherwin Williams "Marine Industrial Coating" epoxy for barrier coat
on my big FG boat and it's done a great job for less than half the cost of
anything sold at the boat stuff store.
If you're just doing seams, check out 3M 5200. Not sure about using on
aluminium, but if you use it on a plastic boat it's a real job getting it
back off. It's a polysulfide sealant and a heck of an adhesive.
MMC

wrote in message
ups.com...
MMC..thanks for your advise.
I looked up this product on the net and it seems like if I do use this
I would be applying this along the seams where the rivets are inside
the boat.
Not sure where I can pick up this product and how much would be
required for a 14ft boat.

Gary

MMC wrote:
I would think a good, thick paint on the outside of the hull would work
better than what you propose. Coal tar epoxy would seal it up real well
and
not cost an arm and a leg.
MMC
wrote in message
oups.com...
I recently inherited a 14 foot aluminum riveted boat from a family
friend.
This boat is in decent shape and I was advised there are no current
leaks with this boat.
I am planning to fix this boat up a bit by putting in floor
boards/carpeting and a few swivel seats.

My question is, is there something I can spray or apply to the bottom
of the boat (inside) that will make it waterproof?
I watched a show on the channel World Fishing Network where a couple
of
hosts sprayed something and made the boat waterproof. I just cant
remember what it is.

I am trying to avoid having to use putty or something to make bandage
solutions to any leaks.

This is my first boat so any help is much much appreciated.

Thanks,
Gary






Reply
Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules

Smilies are On
[IMG] code is Off
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
rec.boats.paddle sea kayaking FAQ [email protected] General 0 April 20th 06 05:35 AM
rec.boats.paddle sea kayaking FAQ [email protected] General 0 February 18th 06 06:27 AM
rec.boats.paddle sea kayaking FAQ [email protected] General 0 January 18th 06 06:48 AM
Getting Her to Liveaboard Mic Cruising 9 August 31st 05 10:49 PM


All times are GMT +1. The time now is 12:10 PM.

Powered by vBulletin® Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright ©2004-2024 BoatBanter.com.
The comments are property of their posters.
 

About Us

"It's about Boats"

 

Copyright © 2017