View Single Post
  #3   Report Post  
posted to rec.boats
[email protected] searay290@gmail.com is offline
external usenet poster
 
First recorded activity by BoatBanter: Jun 2008
Posts: 2
Default Raymarine C70 Display Problem

On Jun 9, 3:58*pm, JR North wrote:
Post to S.E.R. Does it do this with the chart card out, or in? or both?
Disconnect all inputs except the power plug, and retry. There should
also be a reboot key sequence, or holding down cetrtain keys on power
up. Check the manual foe these.
JR

wrote:
I have an almost 2 year old Raymarine C70 Multifunction Display that
has worked great up until yesterday. I powered on the unit and the
display showed vertical black and white lines. *I cycled it a number
of times with the same result. Has anyone experienced a problem
similar to mine with there C70 MFD?


--
--------------------------------------------------------------
* * * * Home Page:http://www.seanet.com/~jasonrnorth


Thanks JR. I didn't have any of my manuals with me yesterday so I am
gathering any suggestions, Raymarine troubleshooting procedures etc..
I'm going to drop the panel and check all the connections to see if I
have a loose ground or similar type of problem. Thanks for the tips,
I'll be looking at those items this weekend.

Jim