View Single Post
  #5   Report Post  
posted to rec.boats
JimH[_2_] JimH[_2_] is offline
external usenet poster
 
First recorded activity by BoatBanter: Sep 2007
Posts: 1,135
Default Raymarine C70 Display Problem

On Jun 9, 4:45 pm, HK wrote:
wrote:
On Jun 9, 3:58 pm, JR North wrote:
Post to S.E.R. Does it do this with the chart card out, or in? or both?
Disconnect all inputs except the power plug, and retry. There should
also be a reboot key sequence, or holding down cetrtain keys on power
up. Check the manual foe these.
JR


wrote:
I have an almost 2 year old Raymarine C70 Multifunction Display that
has worked great up until yesterday. I powered on the unit and the
display showed vertical black and white lines. I cycled it a number
of times with the same result. Has anyone experienced a problem
similar to mine with there C70 MFD?
--
--------------------------------------------------------------
Home Page:http://www.seanet.com/~jasonrnorth


Thanks JR. I didn't have any of my manuals with me yesterday so I am
gathering any suggestions, Raymarine troubleshooting procedures etc..
I'm going to drop the panel and check all the connections to see if I
have a loose ground or similar type of problem. Thanks for the tips,
I'll be looking at those items this weekend.


Jim


Give Raymarine a call. Good tech support, and their techs are in the
United States and speak English.


Good advice! I never had a problem with Raymarine tech service.